Connector Gaskets - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

Our range of connector gaskets includes precision die-cut gaskets made from a large selection of materials, both conductive and non-conductive. DC Shielding comprises waveguide and connector and MIL-C-26482 plus industry standard UG, AN and special profiles cut to customers CONNECTOR GASKETS Generally connector gaskets are cut from thin reinforced materials, such as Aluweave or Monex, to ensure that the compressive forces exerted on the connector do not distort the gasket. However, for certain applica- tions oriented wires in silicone or conductively loaded silicone are selected for their specific properties. Most gaskets can be made from all standard materials but it is important to consider the'land-width'around the periphery of a connector gasket if Aluweave or Monex are specified. In some instances, where a gasket has fixing holes on each corner, the holes are extended outwards to slots helping prevent damage to the gasket during production and fitting. DC gaskets are fitted in the normal manner and particular care should be taken when passing a gasket over a threaded connector body. Avoid the use of conductive adhesives as they tend to adversely affect the sealing characteristics of most types of gasket. The specifications, temperature ranges and shielding performance of each material type can be found in the relevant material sections. For AN connector gaskets specify the relevant part number from the table on the opposite page. For all other waveguide and connector gaskets, state the material type and drawing number, MIL reference or standard specification as applicable or contact us to discuss your requirements. MC-312 = Shell size 12 in 0.5mm Silicone Aluweave MC-210 = Shell size 10 in 0.75mm Silicone Monex Springwood Industrial Estate

 Open the catalogue to page 1

CONNECTOR GASKETS PART NUMBERS ^ n|A For some materials the holes will need to be ° UIA extended to the edge to form U-shaped fixing points. PART NUMBER SUFFIX PART NUMBER PREFIXES Other materials available on request PART NUMBERS SHELL SIZE PART NUMBER SUFFIX PART NUMBER Springwood Industrial Estate

 Open the catalogue to page 2

All P&P Technology catalogues and technical brochures

  1. Metweave

    4 Pages

    En
  2. Knitted Wire Mesh

    10 Pages

    En
  3. Shielded Windows

    3 Pages

    En
  4. Thin EMC Gaskets

    2 Pages

    En