Optional Robot Equipment
6Pages

{{requestButtons}}

Catalog excerpts

Optional Robot Equipment - 1

"This product and the technologies (including software) used in the product are subject to Catch-AII Controls, When exporting any of them, verify the users, applications, etc. according to CAT.NO.R20fl03 the applicable laws and regulations and take appropriate procedures such as applications tor export permission to the Minister of Economy, Trade and Industry If required. JklE series Optional Equipment

Open the catalog to page 1
Optional Robot Equipment - 2

Achieving stable welding operation which enables prevention of welding interruption and reduction in costs of consumables Forced pressurized power feeding torch (TCC torch) (optionaly available) This photo indicates the TCC torch RZ3500H equipped with a shock sensor SSB (optionally available). Pressure spring Secure power feeding realized Disturbance in wire power feeding -Tapered portion (Note 1) This torch is not compatible with stainless steel wire. Deviation of wire position prevented ►This torch improves the deviation of wire po- sition by about 50% or more compared with the standard...

Open the catalog to page 2
Optional Robot Equipment - 3

For automatic cleaning of the torch and wire cutting ■ The clean kit has realized improvement in the operation rate of welding robot and the welding quality. ♦ Automatically removes spatters in the torch nozzle. (L-10748.K-2725) ♦ Enables simultaneous operation of cleaning and application of adhesive spatter inhibitors. (L-10748,K-2725) ♦ Brushing function is added to wire cutting function (K-2726). (L-10748.K-2725) © Wire cut (D Brushing (D Cleaning of spring @ Soaking in liquid © Suction cleaning, application of liquid Dual cleaning function (only for LI 0748) Unburdened by manual...

Open the catalog to page 3
Optional Robot Equipment - 4

For synchronized welding with peripheral jigs Synchromotion function ■ High quality welding has been realized by synchromotion control (software option) between robots and peripheral jigs (positioner, slider, etc.)- Always keeps a constant welding speed! Always secure optimal torch posture! Has achieved simplified teaching operation! The DAIHEN's world first synchromotion has evolved. A wide spectrum of synchromotion controls can be performed depending on the robot systems! Allows synchromotion Allows simultaneous synchromotion of two welding robots Allows synchromotion between the handling...

Open the catalog to page 4
Optional Robot Equipment - 5

Offers offline teaching beyond simulator Offline teaching system AH-ST I High-accuracy/high-performance teaching & simulation achieved by the same operation as that of An robot! Fully compatible with the controller AX21 This teaching system can be jíj operated by the same operation If DAIHEN standard robot system completed only by reading the backup data. New function realizing simplified operation! Snap function at any point [NEW!] The snapping operation can be done anywhere on the surface of 3D model. ' Snapping is possible only at the ■ Direct designation is impossible at the points...

Open the catalog to page 5
Optional Robot Equipment - 6

Workpiece position detection sensor Touch sensor An-WD ■Workpiece position detection sensor by touching the welding wire •Applicable to all the workpieces with a medium thickness or thicker •Most Inexpensive among all workpiece position detection sensors. •Requires no separate sensor unit because this sensor has a built-in controller. •Allows high-speed search at up to 360 cm/min. •A separate sensor unit (optional) Is ready for hardly energized surfaces such as rust and black scale. Tracking sensor for CO2/MAG welding ■Automatic seam tracking by weaving iThis sensor allows correction of...

Open the catalog to page 6

All OTC DAIHEN EUROPE GmbH catalogs and technical brochures

  1. P 402

    1 Pages

  2. FD-B4S

    4 Pages

Archived catalogs

  1. Druck

    1 Pages

  2. MTXCAW-4041

    1 Pages

  3. MTXCA-2531

    1 Pages

  4. FD-V350

    1 Pages

  5. FD-V500

    1 Pages

  6. FD-V700

    1 Pages

  7. FD-LP130

    1 Pages

  8. FD-LP180

    1 Pages

  9. FD-MR20

    1 Pages

  10. FD-MR35

    1 Pages

  11. FD-MR50

    1 Pages

  12. FD-B15

    2 Pages

  13. FD-V6L

    2 Pages

  14. FD-V6

    2 Pages

  15. FD-B4L

    2 Pages

  16. FD series

    28 Pages

  17. welbee

    10 Pages

  18. sensors

    1 Pages

  19. U.R.I

    1 Pages

  20. AX-ST

    2 Pages

  21. AX-C

    4 Pages

  22. Revotorch

    1 Pages

  23. XDM

    2 Pages

  24. DP-270

    1 Pages