Fiber Optic cables - OSI Fiber-Optics - #1

/ 7


catalogue search
Fiber Optic cables - OSI Fiber-Optics
P. 01
Fiber Optic cables - OSI Fiber-Optics
P. 02
Fiber Optic cables - OSI Fiber-Optics
P. 03
Fiber Optic cables - OSI Fiber-Optics
P. 04
Fiber Optic cables - OSI Fiber-Optics
P. 05
Fiber Optic cables - OSI Fiber-Optics
P. 06
Fiber Optic cables - OSI Fiber-Optics
P. 07
Pages:
Fiber Optic cables - OSI Fiber-Optics


See other catalogues for OSI Fiber-Optics
You may also be interested in

Cable harness, Distribution panel, Fiber, Connector, Coupler


Text version of the page

LWL-KABEL

FIBER

-

OPTIC CABLES

LWL-SIMPLEX-, DUPLEX-,MINI-BREAK-OUT-, BREAK-OUT-KABEL FIBER-OPTIC SIMPLEX, DUPLEX, MINI-BREAK-OUT, BREAK-OUT CABLES

gemäß DIN/VDE 0888, IEC 60794-2ANWENDUNGSBEREICHE Simplex- und Duplex-Kabel: acc. to DIN/VDE 0888, IEC 60794-2Applications Simplex and duplex cables: •Pigtails, Patchkabel und Geräteanschlußkabael •Etagenverkabelung (tertiär: horizontal in Etage = FTTD)gemäß ISO/IEC 11801 und DIN EN 50173-2 • pigtails, patch cords and equipment cords • floor cabling (tertiary: horizontal in floor = FTTD)acc. to ISO/IEC 11801 and DIN EN 50173-2 Mini-Break-Out und Break-Out-Kabel: •Schrank » Schrank-Verbindungen •Punkt zu Punkt-Verbindungen (Aktiv » Aktiv) •Etagenverkabelung (tertiär: horizontal in Etage = FTTD)gemäß ISO/IEC 11801 und DIN EN 50173-2 Mini-break-out and break-out cables: • rack-to-rack connections • point -to-point connections (active » active) • floor cabling (tertiary: horizontal in floor = FTTD)acc. to ISO/IEC 11801 and DIN EN 50173-2 Installation • indoor only • in plastic pipes and ducts • conditionally at cable support systems (crush sensitivity!) • conditionally in raised floors (crush sensitivity!) • in distribution racks and active devicesFlame retardancy VERLEGUNG•nur In-Haus•in Kunststoffrohren und Kanälen •bedingt auf Kabeltragsystemen (Quetschgefahr!) •bedingt in Doppelböden (Quetschgefahr!) •in Verteilschränken und AktivgerätenBRANDVERHALTEN•schwer entflammbar•keine Emission von Korrosionsgasen nach IEC 60754-2 •geringe Rauchgasemission nach IEC 61034-2 •geringe BrandfortleitungKABELEIGENSCHAFTEN•Außenmantel aus FR-LSZH-Material (Flame RetardantLow Smoke Zero Halogen)•erhöhte Zugfestigkeit durch nichtmetallischeZugentlastungselemente•Adern für die direkte Steckermontage vor Ort •Standardfarben:SM= gelbMM= orange MM OM3 = aqua (türkis)andere auf Anfrage • flame-retardant • no corrosive gas emission acc. to IEC 60754-2 • low smoke emission acc. to IEC 61034-2•low fire spreadingProperties • outer sheath made of FR-LSZH-material(Flame Retardant Low Smoke Zero Halogen) • increased tensile strength by use of non-metallicstrain-relief elements • fibers to install connectors on site • Standard colors:SM= yellowMM= orange MM OM3 = aqua (turquoise)others on request

18


pageCatalog pdf di En 2012-02-07-14