Catalogue - WXS-CPR High-precision bull nose end mill - OSG - (Version JPG)

See other catalogues for OSG

Reamer, Drill bit, Milling cutter, Carbide tool, End mill

Text version of the page


1 1 .									Wt№ WORK MATERIAL
			OEPTH OF CUT =^=						!K!-:?'JA-KV! HARDENED STEELS PREHARDENED STEELS SKD61■NAK55-NAK80-HPM1 (-45HRC)		HARDENED STEELS PREHARDENED STEELS SKD61-STAVAX-HPM38 (45-55HRC)		mum HARDENED STEELS (55-65HRC)
									aa = 120% ar = 120%		aa = 100% ar=100%		aa=60% ar=80%
								ar	s$eas SPEEO (mirr¹)	FEEO (mm/min)	s$eas SPEEO (min^-1)	SDSS FEEO (mm/min)	seas SPEEO (min^-1)	soas FEEO (mm/min)
			R0.1	R0.2	R0.3	R0.5	R1	ar	s$eas SPEEO (mirr¹)	FEEO (mm/min)	s$eas SPEEO (min^-1)	SDSS FEEO (mm/min)	seas SPEEO (min^-1)	soas FEEO (mm/min)
1	0°	10	0.004	0.008	0.012	-	-	0.09	16,500	650	14,500	530	12,500	380
		12	0.003	0.006	0.009	-	-	0.06	15,500	565	13,500	460	11,500	335
		16	0.002	0.004	0.006	-	-	0.03	12,000	400	10,500	325	9,150	235
		20	0.001	0.003	0.004	-	-	0.024	10,000	285	8,900	230	7,650	170
	1°	6	0.02	0.04	0.06	-	-	0.3	25,500	1,250	22,500	1,150	19,000	840
		10	0.015	0.03	0.045	-	-	0.27	23,000	1,150	20,000	940	17,000	680
		15	0.01	0.02	0.03	-	-	0.12	20,500	915	18,000	740	15,500	540
		20	0.006	0.012	0.018	-	-	0.045	18,000	750	15,500	610	13,500	440
		25	0.002	0.004	0.006	-	-	0.03	16,500	650	14,500	530	12,500	380
		30	0.001	0.002	0.004	-	-	0.021	12,500	465	11,000	380	9,550	275
		35	0.001	0.002	0.003	-	-	0.015	11,500	385	10,000	315	8,600	230
	3°	6	0.02	0.04	0.06	-	-	0.3	25,500	1,450	22,500	1,150	19,000	840
	3°	10	0.02	0.04	0.06	-	-	0.3	23,000	1,300	20,000	1,050	17,000	755
1.2	0°	6	-	0.032	0.048	-	-	0.36	19,000	1,200	18,000	1,050	14,500	735
		8	-	0.018	0.027	-	-	0.252	17,000	965	16,000	845	13,000	580
		10	-	0.011	0.016	-	-	0.216	16,000	850	15,000	740	12,000	510
1.5	0°	6	0.02	0.04	0.06	-	-	0.45	17,000	1,450	16,000	1,250	13,500	880
		8	0.013	0.026	0.039	-	-	0.382	16,000	1,250	15,500	1,100	12,500	750
		10	0.009	0.018	0.027	-	-	0.292	14,500	1,000	13,500	900	11,000	625
		12	0.006	0.012	0.018	-	-	0.27	13,500	900	12,500	790	10,500	550
		16	0.003	0.007	0.01	-	-	0.112	9,150	525	8,650	460	7,150	320
	1°	10	0.019	0.039	0.049	-	-	0.45	18,500	1,500	17,500	1,300	14,500	905
		15	0.015	0.03	0.037	-	-	0.405	17,000	1,150	16,000	1,000	13,500	705
		20	0.01	0.02	0.025	-	-	0.27	15,500	1,100	15,000	970	12,000	675
		25	0.008	0.008	0.01	-	-	0.135	14,500	950	13,500	835	11,500	580
		30	0.003	0.006	0.075	-	-	0.067	13,500	840	12,500	740	10,500	515
	3°	10	0.02	0.04	0.05	-	-	0.45	18,500	1,550	17,500	1,350	14,500	940
	3°	15	0.02	0.04	0.05	-	-	0.45	17,000	1,450	16,000	1,250	13,500	880
2	0°	8	0.02	0.04	0.06	0.075	-	0.6	13,000	1,450	13,000	1,300	11,500	1,000
		10	0.016	0.032	0.048	0.06	-	0.51	12,000	1,300	12,000	1,150	11,000	905
		12	0.01	0.02	0.03	0.037	-	0.42	11,500	1,150	11,500	1,050	10,000	810
		16	0.006	0.012	0.018	0.022	-	0.36	10,000	900	10,000	800	8,900	630
		20	0.004	0.008	0.012	0.015	-	0.18	9,300	730	9,300	650	8,250	510

I.Use a rigid and precise machine and holder.

2.When machining carbon steels or hardened steels, using MQL(Minimum Quantity Lubrication / mist coolant) is recommended.

3.The above condition shows an approximate standard for contouring operation (side milling) with a low machining load. If abnormal cutting sounds, vibration or chattering occur depending on the machining shape, cutting amount, rigidity of the machine or work holding condition, etc., please adjust the speed, feed and the depth of cut.

4.Adjust the speed, feed rate, and depth of cut if chattering, vibration or abnormal

grinding sounds occur. 5.Helical or ramp milling is recommended during the approach of a Z cut. 6.Adjust the speed, feed rate, and the depth of the cut according to the shape of

the work, rigidity of the machine, and how the work is held.

WXS-CPR High-precision bull nose end mill - OSG - #11

Reamer, Drill bit, Milling cutter, Carbide tool, End mill