Catalogue - FTO-GDXL Series - OSG - (Version JPG)

See other catalogues for OSG

Carbide tool, End mill, Drilling tool, Reamer, CBN milling cutter

Text version of the page

DRILLS - BOHRER - PUNTE- FORETS

Pilot - Drills

Pilot - Drills FTO-PLT

■ Sizes

Recommended operation

© FTO-PLT : Make a pilot hole.

FTO-M-GDXL

Insert the FTO-M-GDXL into a pilot hole with low speed.

0 For a pilot hole, select 0,02~0,05mm lerger size drill than FTO-GDXL, FTO-M-GDXL, CAO-GDXL.

• Please select FTO-PLT, FTO-GDN or FTO-GDS as Pilot Drill.

FTO-GDXL, FTO-M-GDXL, CAO-GDXL D+ 0,02~0,05mm

(3) Increase to the designated speed and start drilling.

@ After drilling, move the drill away from the bottom of the hole; then reduce its speed while pulling it out of the hole.

• When working on a curved surface, use the FX-ZDS.

Make sure to use an internal coolant supply when drilling.

a. o

m o