digiBASE-14-Pin-PMT-Base-Integrated-Bias-Supply-Preamplifier-MCA-Digital-Signal-Processing-NaI-Spectrosocpy - ORTEC - #1

Text version of the page

ORTEC® digiBASE™ 14-Pin PMT Tube Base with Integrated Bias Supply, Preamplifier, and MCA (with Digital Signal Processing) for NaI Spectroscopy USB Interface. . . All In One. . . Digital Signal Processing GO DIGITAL. . . Power Up With digiBASE. . . • Full featured digital MCA and gain stabilizer for ultimate stability • Fast data acquisition for maximum throughput • The ultimate in Fine Time Resolution with “List Mode” • Multi-detector arrays made simple with USB Connection • 0 to +1200-V Detector Bias Voltage • Includes MAESTRO-32 advanced MCA software. (ScintiVision-32 optional.) The digiBASE is a 14-pin photomultiplier tube base for gamma-ray spectroscopy applications with NaI(Tl) scintillation detectors. The unique concept of the digiBASE combines a miniaturized preamplifier and detector high voltage (0 to +1200 V bias) with powerful digital signal processing, multichannel analyzer, and special features for fine time resolution measurements — all contained in a low-power (<500 mA), lightweight (10 oz, 280 g), small-size (63 mm diameter x 80 mm length) tube base with a USB connection. Everything you need to connect to your NaI(Tl) detector is included in the tube base. Furthermore, there is no need to open your computer to install an interface card, or for using external NIM-based components. The digiBASE includes MAESTRO-32 MCA emulation software and is available with ScintiVision-32 for complete quantitative analysis. Simple Installation Installation is simple via the USB interface of the PC. Just load the software, establish communications using ORTEC CONNECTIONS-32 software and begin making measurements. It’s that simple!