XD INDEXER
ORMEC's Indexing Servo Drives, the XD-Series, is anything but ordinary. The XD Indexer is a high performance, single
axis servo drive full of advanced motion control features that are typically only found in programmable products.
MotionSet software provides intuitive tools that reduce commissioning time down to just minutes. Drag and drop I/O
assignments and familiar menu driven programming environment make the XD Indexer easy to configure. Application
specific features are quickly configured.
ORMEC‟s industry leading Motor Wizard simplifies non-standard motor configuration and enables seamless integration
of most third party motors with the XD Indexer. Once the user program and motor data are loaded onto the indexer the
configuration information is stored both in the indexer and on a removable flash memory card¹, providing application
data backup, axis cloning, and machine documentation storage. MotionSet‟s digital scope and monitor utility make
application testing and optimization easy.
Motion Features
32 independent motion profiles including Incremental and Absolute Indexing, Gearing, Registration¹, Camming¹, &
Blended Moves. Flexible Homing routines and Jogging are also available in addition to these 32 motions
Motion profiles can be mapped to I/O, initiated via Modbus TCP, chained and/or looped
Synchronize motion with machine I/O (i.e. Start, Stop, or Trigger speed changes with inputs at any point in the
chain)
I/O can be mapped to change from Position, Velocity, or Torque
Modes during program execution¹
Easy-to-define user units for axis position, speed, acceleration, and
deceleration further simplify programming
Resolution scaling of quadrature output
Communication
Modbus TCP is standard. One other Fieldbus (Ethernet/IP, CANopen¹,
Profibus-DP¹) may be added.
o Adjust motion parameters (speed, distance, etc) as needed
o Access all system variables
o Trigger motion with a PLC or
HMI
o Read real-time axis status
USB and Ethernet Connectivity
o Fast and reliable commissioning
o Available on all modern laptop and desktop computers
Flexible I/O: 14 inputs, 8 outputs, 1 analog input
o Outputs can be utilized for basic logic control
Wide Power Range
Available in 115, 230 and 460 VAC input power
Continuous current ratings from 3 to 60A rms
Features for Typical and Difficult Applications
The features of the XD Indexer have been developed to meet a wide range of applications. Intelligent Conveyor Control,
Pick and Place, Ultrasonic Welding, Stamping, Pin Insertion, Drilling, Grinding, Labeling, Flying Shear, Rotary Knives,
Scanning, High Speed Printing, Part Storage and Retrieval, and many more are easily configured. The XD-Series
Indexer family has many built-in features to support otherwise difficult application requirements such as Tension
Control¹, Dual Loop Feedback, Registration¹, Gearing and more. ORMEC offers a wide range of standard motors and
cables to fit most applications and the XD Indexer is compatible with nearly all industrial servo motor technologies.
ORMEC Systems Corp. │19 Linden Park│ Rochester, NY 14625 │ (585) 385-3520 │ www.ormec.com
ORMEC Systems Corp, 19 Linden Park, Rochester, NY 14625, Phone: (585) 385-3520, www.ormec.com
