See other catalogues for
ORMEC Systems Corp.
You may also be interested in
Text version of the page
M-Series Servo Motors
ORMEC -1- M-SERIES SERVO MOTORS
AC Brushless Servo Motors
ORMEC's M-series AC brushless servo
motors provide high torque-to- inertia
ratios and excellent continuous torque
and peak torque performance in a
compact design. These industrialquality
servo motors incorporate high
performance neodymium magnets and
a highly efficient stator winding design
which results in excellent power
density.
The M-series servo motors also
completely eliminate brush wear
maintenance problems, and feature
extremely durable construction which
includes heavy duty bearings.
Rugged MS connectors provide
reliable interconnections to both motor
and optical encoder.
Continuous stall torques from 1.4
to 248 in-lb (0.16 to 28 N-m)
High peak torques from 4.4 to
557 in-lb (0.5 to 63 N-m)
Output power from 50 to 4,400
watts (0.07 to 5.9 HP)
High maximum speeds from
3,000 to 5,000 RPM
Incremental encoder resolutions up
to 24,000 counts per revolution
Optional absolute encoders feature
multi-rev operation up to
1,048,576 cts/rev.
Class F insulation over Class B
temperature rise provides
additional thermal headroom for
longer winding life under rated
operating conditions
Minimum torque ripple & cogging
for smooth low-speed performance
Totally Enclosed Non-Ventilated
(TENV) standard IP-65 except
shaft opening, optional shaft oil
seal is available.
Optional fail-safe holding brakes
The performance of these servo
motors is a direct function of the factorymatched
servo motor/drive combination.
ORMEC's ServoWire
®
drives
provide software controlled all-digital
performance for consistent operation that
totally eliminates analog potentiometer
adjustments. High bandwidth operation
and a quality high resolution encoder
provide the response and accuracy for
demanding applications. Peak torques
up to three times the rated torque are
available for a few seconds, allowing the
motor/drive to handle high inertial loads
and heavy duty cycle requirements.
Each drive's motor parameters are
configured in software for high
performance and RMS current limiting.
Cost-effective absolute encoder
support provides axis position over a
range of 65,536 revolutions. In
continuous uni-directional operation, the
position count continually "wraps"
through the full range while maintaining
absolute position within the cycle.
Position is maintained through power
cycles by a lithium battery (optional) on
the ServoWire® digital drive. Call
ORMEC for ordering information.
ORMEC’s M-series servo motors offer continuous stall torques from 1.4
to 248 in-lb (0.16 to 28 N-m)
Features Motor/Drive Combinations Absolute Encoder Option
Index
Motor Part Numbers 2
Motor Specs 4
Motors w/brakes 10
Motor Outline Drawings 11
Connectors & Cables 14
Lineshaft Pacer Encoders 15
