Catalogs >
ORIENTAL MOTOR >
SPV - Series

SPV - Series
7Pages

Catalog excerpts

Motorized Linear Slides ●Connection Information● Technical reference ➜ Page G-1 Safety standards ➜ Page H-2 The SPV Series employs an stepping motor and controller system for tuning-free, misstep-free operation. The belt driven actuator allows the load to be transferred at high-speed and long strokes. ● For detailed product safety standard information including standards, file number and certification body, please visit www.orientalmotor.eu. Motor Installed on Bottom ■ Features ● Adopting a Closed Loop Stepping Motor, This Linear Slide Eliminates Misstep and Hunting, While Attaining High-Speed and High-Response Operation The linear slide has no hunting problem upon stopping. The vibration and noise levels have been lowered by employing advanced technology that produces smoothness comparable to a microstep driver. ● Drivable at a Maximum Speed of 400 mm/s and Acceleration of 5 m/s2 ● Long Stroke The belt drive supports long strokes up to 1000 mm. ● Easy Wiring between the Linear Slide and Controller The linear slide and controller are connected via a single cable, and the wiring distance can be extended to a maximum of 10 m. The cable is fitted with a connector for quick connection. Flexible Conduit The motor cable is sold separately. The SPV Series boasts a maximum speed of 400 mm/s. It also achieves an acceleration of 5 m/s2 when carrying a load corresponding to the maximum transportable mass in the horizontal direction. The cable can be placed in a flexible conduit or cable gland with an inner diameter of ϕ16.5 mm. ORIENTAL MOTOR GENERAL C

Open the catalog to page 1

Motorized Actuators ● Using in Controller Mode ■ System Configuration ✽1 Not supplied Required Products (Sold separately) ③ Data Editing Software Motorized Linear Slides ①Connection Cables Motorized Cylinders Linear Motion Controller Linear Slide Sensor is included DC Power Supply✽1 (Main power supply) Accessories (Sold separately) ⑦ Connector – Terminal Block Conversion Unit ✽ 2 Not required if a sensorless return-to-home operation is performed. ●The system configuration shown above is an example. Other combinations are available. Sold Separately I/O Cable Sensor Extension Cable✽2 (1 m) (2...

Open the catalog to page 2

Motorized Linear Slides SPV Series ■ System Configuration ● Using in Driver Mode When performing return-to-home operation using the linear motion controller, refer to system configuration example on page E-37. Teaching pendant or data editing software is required to change parameters (I/O logic, velocity filter, etc.) of the linear motion controller. ✽ Not supplied Required Products (Sold separately) ①Connection Cables ( ➜ Page E-97) SPV Series Linear Motion Controller Linear Slide Sensor is included Programmable Controller✽ Sensor with Cable (Included) DC Power Supply✽ (Main power supply)...

Open the catalog to page 3

① Series ② Linear Slide Size ③ Lead Stroke Motor Installation Direction ⑥ Power Supply Voltage Motorized Linear Slides SPV: SPV Series 6: Width: 60 mm Height: 67 mm K: 75 mm 010: 100 mm 020: 200 mm 030: 300 mm 040: 400 mm 050: 500 mm 060: 600 mm 070: 700 mm 080: 800 mm 090: 900 mm 100: 1000 mm U: Motor Installed on Top D: Motor Installed on Bottom K: 24 VDC ◼ Product Number Code ●General specifications of controller ➜ Page E-87 This is the value after rated operation under normal ambient temperature and humidity. Dielectric Strength Sufficient to withstand the following for 1 minute: ·Motor...

Open the catalog to page 4

Motorized Linear Slides SPV Series Maximum Transportable Mass: Horizontal 10 kg Stroke: 100 to 1000 mm (100 mm increments) ◼ Linear Slide Specifications Drive Method Belt Repetitive Positioning Accuracy [mm] ±0.05 Product Name SPV6K□U-K SPV6K□D-K Resolution [mm] 0.01 (Driver Mode: 0.05) Transportable Mass [kg] Horizontal Vertical Dynamic Permissible Moment [N·m] MP: 18 MY: 16 MR: 9 Holding Force Maximum Speed ● A number indicating the stroke length is entered where the box □ is located within the product name. ◼ Sensor Specifications Item Product Name: EE-SX671A (OMRON) Power Supply 5 to 24...

Open the catalog to page 5

Motorized Actuators Introduction ◼ Dimensions of Linear Slide (Unit = mm) ◇ Motor Installed on Top L1±2 HOME Sensor Detection Table Position −LS Sensor Detection Table Position Table Limit Position +LS Sensor Detection Table Position Table Limit Position ✽ The settings "55", "10" and "112" indicate the recommended mounting positions of the −LS sensor, HOME sensor and +LS sensor, respectively. Sensors and a shield plate can also be installed on the opposite side. ◇ Motor Installed on Bottom L1±2 100 54±0.5 30±0.5 +LS Sensor Detection Table Position Table Limit Position Hollow Rotary...

Open the catalog to page 6