video corpo

BMU - Series - 20 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

Catalogue excerpts

High Torque Gearheads Parallel Shaft Gearhead 120W, 200W, Gear Ratio 5 - 1200 Right-Angle Hollow Shaft Hypoid JH Gearhead Foot Mount Type JB Gearhead Parallel Shaft JV Gearhead Foot Mount Type Gearhead Right-Angle Hollow Shaft Hypoid Gearhead These gearheads are designed for our compact motors of BMU and BLE2 series. They are specified with high torque and big axial and radial loads. Right-Angle Hollow Shaft Hypoid JH Gearhead "Permissible Torque "High Strength No torque saturation over the entire speed range. Compared to conventional gearheads 2x more Permissible Radial Load 981 N "Degree of Protection IP66 The degree of protection is IP66 which is realized by the stainless steel shaft (JH and JV gearhead). Gear Ratio ●Stainless Steel Shaft Permissible Axial Load 261 N JH gearhead conventional parallel shaft type JB gearhead (steel shaft): IP44 Foot Mount Type JB Gearhead • Parallel Shaft JV Gearhead "High Permissible Torque Up to 518 N·m 600 Foot Mount Type Parallel Shaft with Foot Mount Type "High Gear Ratio Flange Type Permissible Radial Load Permissible Radial Load "High Strength Permissible Axial Load Permissible radial load Permissible Axial Load Foot Mount Type JB Gearhead Permissible radial load Permissible axial load Permissible axial

 Open the catalogue to page 1

•Downsizing Downsizes the construction by direct mounting to the conveyor. Furthermore, the concentric shaft offers more flexibility for the mounting direction. •Lower Cost Reduction of costs and parts thanks to direct connection. ■Features of Foot Mount Gearhead •No Need for Mounting Bracket Can be mounted directly to the application. •High Rigidity, One-Piece Construction One-piece construction for easy shaft centering. ❖ For low gear ratios of 5~200 of the parallel shaft gearhead the GFV gearhead is also available. For details please refer to the BMU Series or BLE2 Series catalogue or the website:...

 Open the catalogue to page 2

•Example of System Configuration Sold Separately •The system configuration shown above is an example. Other combinations are also available. 3

 Open the catalogue to page 3

•Motor (Combination Type/Round Shaft Type) O Right-Angle Hollow Shaft Hypoid JH Geared / Foot Mount Type JB Geared / Parallel Shaft JV Geared BLM 5 200 H P K - 5 C B 50 B - L © © © ©@© @®®®©@ Motor Product Code    Gearhead Product Code

 Open the catalogue to page 4

The motor, the driver and the connection cables are purchased individually. For the single-phase 100-120 VAC models, please contact the nearest Oriental Motor sales office. •Motors O Right-Angle Hollow Shaft Hypoid JH Geared •Drivers OBLE2 Series Output Power Output Power O Foot Mount Type JB Geared OBMU Series Output Power O Parallel Shaft JV Geared Output Power •Other Lineup Connector Position Selection of 4 Directions. Two types of the connection cables with different drawing directions are available F : Cable drawn by the output shaft side    B : Cable drawn in the opposite side of • For details...

 Open the catalogue to page 5

Specifications    c^lus C€O Gear Flange Position Gear Case O Load Position Radial Load Axial Load Product Name ❖ 1 Only for BLE2 series driver: The brackets ( ) indicate specification for analog setting. ❖ 2 For BMU series, the Conditions Operating ambient temperature is 0—+40°C •The values correspond to each specification and characteristic of a stand-alone motor. ❖ 1 The rotation direction is viewed from the gear flange side (see illustration on the right) ❖ 2 The speed of the output shaft is the value of the speed divided by the gear ratio. ❖ 3 The permissible radial load can also be calculated...

 Open the catalogue to page 6

Specifications    c^ius C€OGear Flange Position Gear Case O Load Position Radial Load Axial Load Product Name ❖ 1 Only for BLE2 series driver: The brackets ( ) indicate specification for analog setting. ❖ 2 For BMU series, the Conditions Operating ambient temperature is 0—+40°C •The values correspond to each specification and characteristic of a stand-alone motor. ❖ 1 The rotation direction is viewed from the gear flange side (see illustration on the right) ❖ 2 The speed of the output shaft is the value of the speed divided by the gear ratio. ❖ 3 The permissible radial load can also be calculated...

 Open the catalogue to page 7

Foot Mount Type JB Geared 200 wSpecifications    c^lus C€ Product Name ❖ 1 Only for BLE2 series driver: The brackets ( ) indicate specification for analog setting. ❖ 2 For BMU series, the Conditions Operating ambient temperature is 0—+40°C •The values correspond to each specification and characteristic of a stand-alone motor. ❖ 1 The speed of the output shaft is the value of the speed divided by the gear ratio. ❖ 2 It is also applicable when digitally setting the deceleration time to below 0.1 seconds. ^Load Position Distance from OutDut Shaft End Speed - Torque Characteristics Continuous Duty...

 Open the catalogue to page 8

Parallel Shaft JV Geared 200 wSpecifications    c^ius C€ Product Name ❖ 1 Only for BLE2 series driver: The brackets ( ) indicate specification for analog setting. ❖ 2 For BMU series, the Conditions Operating ambient temperature is 0-+40°C •The values correspond to each specification and characteristic of a stand-alone motor. ❖ 1 The speed of the output shaft is the value of the speed divided by the gear ratio. ❖ 2 It is also applicable when digitally setting the deceleration time to below 0.1 seconds. ^Load Position Radial Load Axial Load 10 mm 20 mm Distance from Output Shaft End •A number indicating...

 Open the catalogue to page 9

Overload alarm detection time- The overload alarm is generated if the operation goes beyond the continuous duty region. The detection time for this overload alarm can be set from 0.1 ~60.0 seconds. (Initial value: 30.0 Seconds) However, an alarm is generated for a maximum length of 5 seconds in the following cases. ■ If an applied load goes beyond the limited duty region ■ If the output shaft

 Open the catalogue to page 10

General Specifications Item ❖ 1 Attach the BLE2 series driver to a location that has the same heat radiation capability as an aluminum metal plate. Single installed 200x200 mm, 2 mm thick Installed in contact 350x350 mm, 2 mm thick ❖ 2 When using a DIN rail mounting bracket, the ambient temperature is 0~+40°C. ❖ 3 The storage condition applies to a short period such as a period during transportation. ❖ 4 The IP indication that shows the watertight and dust-resistant performance are specified under IEC 60529 and IEC 60034-5. | Note | •Do not measure insulation resistance or perform the dielectric...

 Open the catalogue to page 11

All Oriental Motor catalogues and technical brochures

  1. Brake Pack

    4 Pages

    En
  2. Torque Motors

    8 Pages

    En
  3. TM Series

    32 Pages

    En
  4. World K Series

    124 Pages

    En
  5. PKP Series

    28 Pages

    En
  6. CVK Series

    36 Pages

    En
  7. EAS Series

    128 Pages

    En
  8. DRS2 Series

    20 Pages

    En
  9. EZS Series

    13 Pages

    En
  10. NX Series

    44 Pages

    En
  11. DGII AR

    52 Pages

    En
  12. MBS - Series

    6 Pages

    En
  13. MBD - Series

    7 Pages

    En
  14. MF - Series

    4 Pages

    En
  15. MFD - Series

    4 Pages

    En
  16. AZ DC - Series

    43 Pages

    En
  17. AZ AC - Series

    47 Pages

    En
  18. BLV - Series

    16 Pages

    En
  19. BLH - Series

    16 Pages

    En
  20. BLE2 - Series

    20 Pages

    En
  21. FPW - Series

    8 Pages

    En
  22. World K - Series

    50 Pages

    En
  23. World K - Series

    25 Pages

    En
  24. KII - Series

    60 Pages

    En
  25. Product Range

    12 Pages

    En
  26. Cross Flow Fans

    2 Pages

    En