See other catalogues for
ORBIS
You may also be interested in
Text version of the page
Molded-In Logo identification is a type of permanent identification that is molded into the pallet or top cap
during production. Original artwork must be supplied to ORBIS at the time of the order. Availability, requirement and
location for the molded-in identification can vary for each pallet.
Hot Stamp identification utilizes .5” block capital letters in a predefined area on the pallet or top cap. Availability,
requirements, and location for the hot stamp can vary for each pallet.
Identification Plates are rigid plastic plates with adhesive backing that affix securely to your pallet. These plates are
designed for durability and a long service life. All ORBIS pallets can accommodate identification plates. Availability,
requirement and location of the identification plates can vary for each pallet.
Vinyl Labels are flexible plastic labels with adhesive backing that affix securely to your pallet. These long lasting
labels are for use on all ORBIS thermoformed (HMWPE) pallets. Availability, requirement and location for the vinyl
labels can vary for each pallet.
*Special vinyl labels are now available for some structural foam pallets. Please contact ORBIS for details.
Custom Color Striping is available on most thermoformed pallets and thermoformed OPTE Pallets to provide a
unique identification alternative. Standard stripe widths are two and four inches. Stripe color must be specified at the
time of the order and requires minimum order quantities.
Seat Belt Assemblies attach to the pallet and top cap to effectively secure pallet loads. Our innovative seat belts
accommodate high stack loads and will not twist, tangle or jam. The short lock zone provides a secure fit on short
stack heights, and our easy grab tongue loop prevents the belt from retracting back into the pallet. Available on
various 30” x 32”, 30” x 36”, 32” x 38”, 40” x 48” and 45” x 48” pallets. Strap length is approximately 59’ from housing to
end of strap. Standard Color: Black
Rubber Grommets are placed in predetermined areas on the pallet deck, fork tine area or feet on select ORBIS
pallets to stabilize a unit load and guard against load shifting by providing a non-skid surface. Anti-Skid Disks are also
available for many pallet styles. Standard Colors: Deck Grommets - Beige; Foot Grommets - Beige; Fork Tine Grommets
- Beige; OP Grommets - Grey; Spin Disks - Natural, Clear.
Deck Inserts and Leg Covers will quickly and easily snap into the pallet to cover the leg hole openings. These
inserts prevent interference with small loads, conveyor systems, and other material handling equipment. Note: Pallets
will not nest after inserts have been installed. Available on all POP, 45 x 48-A, nestable and stackable 48” x 48” and
48” x 72” structural foam pallets. Standard: Black
Non-Skid Diamond Pattern Surface is available on selected pallets to prevent product slippage during
storage and transport.
PALLET ACCESSORIES &
IDENTIFICATION OPTIONS
A variety of options and accessories are available for ORBIS pallets and top caps to increase their efficiency and flexibility. All options are not
applicable to all products. Minimum order quantities and set-up charges may apply. Nominal specifications subject to changes without notice.
Contact your ORBIS representative for more details.
Meat/Poultry Refrigerated/Frozen Foods Bakery Items Snack Goods
99 www.orbiscorporation.com PALLETS
Interested in recycling your plastic pallets at the end of
their service life? “Recycle with ORBIS” is a convenient
program designed to effectively recover, recycle and
reprocess plastic pallets into other useful products. To
learn more, contact your ORBIS Sales Representative.
