optris CTlaser 3M
2Pages

{{requestButtons}}

Catalog excerpts

optris CTlaser 3M - 1

optris® CTlaser 3M TECHNICAL DATA Non-contact temperature measurement with precise aiming from 50 °C to 1800 °C Features: • ccurate temperature measurements of metals, secondary metal processing A and ceramic materials • Double laser aiming marks real spot location at any distance • Optical resolution up to 300:1 with selectable focus • emperature ranges from 50 °C to 1800 °C, with selectable focus Temperature T ranges from 50 °C to 1800 °C, measuring spots up from 0.7 mm and response times up from 1 ms • Usable up to 85 °C ambient temperature without cooling • Short measuring wave length of 2.3 μm reduces error of temperature readings on surfaces with low or unknown emissivity Measurement specifications Temperature range2) (scalable via programming keys or software) General specifications Environmental rating Spectral range –20 °C ... 85 °C (sensing head, 50 °C with laser ON) –20 °C ... 85 °C (electronics) Optical resolution (90 % energy) Storage temperature – 40 °C ... 125 °C (sensing head) – 40 °C ... 85 °C (electronics) System accuracy4) (at ambient temp. 23 ±5 °C) Relative humidity Repeatability (at ambient temp. 23 ±5 °C) Vibration (sensor) Shock (sensor) 600 g (sensing head) / 420 g (electronics) Temperature resolution (digital) Exposure time5) (90 % signal) Emissivity/ Gain (adjustable via programming keys or software) Transmissivity/ Gain (adjustable via programming keys or software) Signal processing (parameter adjustable via programming keys or software, respectively) Peak hold, valley hold, average; extended hold function with threshold and hysteresis optris® Compact Connect Electrical specifications Outputs / analog Relay: 2 x 60 V DC / 42 V ACeff; 0.4 A; optically isolated USB, RS232, RS485, CAN, Profibus DP, Ethernet (optional) Output impedances mA max. 500 Ω (with 5 – 36 V DC) mV min. 100 kΩ load impedance thermocouple 20 Ω Programmable functional inputs for external emissivity adjustment, ambient temperature compensation, trigger (reset of hold functions) Cable length Power Supply Current draw functioning of the LCD display may be limited in ambient temperatures below 0 °C 2) T object >Tsensing head +25 °C 3) Specification valid at T object ≥ start of measurement range +50 °C 4) ε = 1, response time 1 s 5) With dynamic adaptation at low signal levels 1 mW, ON/OFF via electronic box or software

Open the catalog to page 1
optris CTlaser 3M - 2

Dimensions Sensing head Electronics Specifications are subject to change without notice ■ CTlaser 3M-E2018-08-A

Open the catalog to page 2

All Optris catalogs and technical brochures

  1. optris Xi 80

    2 Pages

  2. optris CT 4M

    2 Pages

  3. CX hs

    2 Pages

  4. optris CT 3M

    2 Pages

  5. optris CT G5

    2 Pages

  6. optris CT P7

    2 Pages

  7. optris CT P3

    2 Pages

  8. IR-Basics

    40 Pages

  9. PI NetBox

    1 Pages

  10. optris PI 1M

    2 Pages

  11. CTlaser P7

    2 Pages

  12. CSlaser G5HF

    2 Pages

  13. CSlaser 2M

    2 Pages

  14. Optris CT P7

    2 Pages

  15. optris CT P3

    2 Pages

  16. optris-CT G5

    2 Pages

  17. CT 3M

    2 Pages

  18. CT 1M 2M

    2 Pages

  19. CThot LT

    2 Pages

  20. CTfast LT

    2 Pages

  21. CSmicro 2M

    2 Pages

  22. optris CX LT

    2 Pages

  23. CT LT

    2 Pages

  24. CSmed LT

    2 Pages

Archived catalogs

  1. Optris CT 4M

    2 Pages

  2. optris CX

    2 Pages

  3. optris MS LT

    2 Pages

  4. PI 450 G7

    2 Pages