Catalogs >
Optris >
CT 3M

CT 3M
2Pages

Catalog excerpts

optris® CT 3M TECHNICAL DATA Precise non-contact temperature measurement of metal from 50 °C to 1800 °C Features: • Miniaturized Infrared Thermometer with 2.3 μm wave length range for measurements of metals, of secondary metal processing, metal oxides and ceramic materials • Very small sensing head of 14 mm diameter and 28 mm length fits everywhere and is usable up to 85 °C ambient temperature without cooling • emperature measuring ranges from 50 °C to 1800 °C and exposure times T starting from 1 ms • Short wave length range of 2.3 μm to reduce error of reasding with measurements on materials with unknown emissivity Measurement Specifications Temperature ranges (scalable via programming keys or software)1) Spectral ranges General Specifications Optical resolution (90 % energy) Environmental rating Ambient temperature –20 °C ... 85 °C (sensing head) 0 °C ... 85 °C (electronics) Storage temperature – 40 °C ... 125 °C (sensing head) – 40 °C ... 85 °C (electronics) System accuracy2) (at ambient temp. 23 ±5 °C) Relative humidity Vibration (sensor) Repeatability (at ambient temp. 23 ± 5 °C) Shock (sensor) Temperature resolution 40 g (sensing head) 420 g (electronics) Emissivity / Gain (adjustable via programming keys or software) Transmissivity / Gain (adjustable via programming keys or software) Signal processing (parameter adjustable via programming keys or software, respectively) Peak hold, valley hold, average; extended hold function with threshold and hysteresis optris® Compact Connect Electrical Specifications Outputs / analog Relay: 2 x 60 V DC/ 42 V ACeff; 0.4 A; optically isolated USB, RS232, RS485, CAN, Profibus DP, Ethernet (optional) Output impedances mA max. 500 Ω (with 8 – 36 V DC) mV min. 100 kΩ load impedance thermocouple 20 Ω Programmable functional inputs for external emissivity adjustment, ambient temperature compensation, trigger (reset of hold functions) Cable length Current draw Power Supply Tobject >Tsensing head +25 °C ε = 1, response time 1 s 3) With dynamic adaptation at low signal levels 4) Specification valid at T object ≥ start of measurement range +50 °C 1) Optris GmbH · Ferdinand-Buisso

Open the catalog to page 1

Optical Specifications Optics CT 3ML SF, D:S = 22:1 Dimensions Electronics Messkopf (built-in CF lense) Accessories (examples) CF-Vorsatzlinse (ACCTCF) Montagewinkel, fest (ACCTFB) Freiblasvorsatz mit integrierter CF-Vorsatzlinse (ACCTAPLCF) Specifications are subject to change without notice · CT 3M-EN2018-07-A Sensing head

Open the catalog to page 2