OP250 Stabilized Light Source - OptoTest - #1

Text version of the page

805.987.1700 sales@optotes t.com engineering@optotes t.com OptoTest Corp. 4750 Calle Quetzal Camarillo,CA 93012 OP250 Stabilized Light Source The OP250 is a configurable stabilized light source with a variety of Lasers and LEDs. Available in a single port or dual port configuration, selectable wavelengths, and various power levels and industry standard optical interfaces this instrument offers all the features and functions necessary for the development, testing and inspecting of optical components and cables. The standalone, internally powered module also connects to the USB port of any computer. OptoTest provides for drivers and applications integrating it with the OP500 series of power meters. This allows the user to perform common measurement tasks such as EXCEL compatible data logging or timestamped stability measurements. Stabilized Light Source Stabilized Light Source Depending on the type of source the one hour stability is better than 0.02dB.LEDs and if necessary laser sources are temperature compensated. InGaAs detector, +6dBm...-75dBm for Silicon detector. Single port Laser source Available wavelengths are between 630nm and 1625nm at power levels up to 5mW. Dual port Laser source Configured for telecom testing at 1310nm and 1550nm, other combinations are available per customer request. Single port or dual port LED source Selectable wavelength are between 630nm and 1550nm with power levels up to 1mW. Special Launch Conditions such as underfill and overfill can be ordered. NEW Features NE W Overview Model OP250 stabilized light source NEW Applications Internal chargeable batter y The internal battery is based on latest Lithium Ion technology for longer lasting operation. USB Powered, plug& play data acquisition Besides the internal chargeable battery or external power supply the OP250 is a bus powered, low power (<100mA) USB device. In addition to powering the source the battery is charged through the USB bus. With the supplied drivers the source output power and can be controlled remotely. Integrated ambient temperature tracking If connected to the USB bus the OP250 measures the ambient temperature (Cº or Fº) within -10 Cº ...+55 Cº at a resolution of 0.1 Cº. This feature eliminates the need for an external temperature sensor during long-term stability testing. Generic Applications Wherever and whenever a light source is needed to test or qualify optical components, cables and systems the OP250 is an economical solution. Cable Insertion Loss When bundled with the OP500 series optical power meters the insertion loss of cables is measured and logged efficiently all controlled with the OPL-5 application software. Multi-Wavelength Source The remote control feature of the OP250 comes in handy when a device such as a WDM is tested with multiple wavelengths. Part number, and serial number directly into spreadsheets. The Test button on the module allows the user to trigger measurements on the desk.