New LED controller power supply OPPF series and sensing LED Bar lighting OPB-S series - Optex FA - #1

Text version of the page

- High performance as well as OPB series LED controller Advanced OPPF series Sensing LED bar lighting OPB-S series LED lighting controller Advanced OPPF series Sensing LED bar lighting OPB-S series Specifications of OPB-S series - Adjustable multiple lightings same brightness easily - “FALUX sensing” technology built-in - PWM brightness control & strobe drive - “FALUX sensing” technology for monitoring and feedback controlling - Brightness is controllable through RS232/Parallel/Analog 0-5V Communication between the controller and the LED lighting enables accurate monitoring and feedback brightness controlling. 74623-01-300410-1102 White 7,000K DC12V Housing : Aluminum , PBT Lens : PC CE, RoHS 50 × 15 100 × 15 150 × 15 200 × 15 250 × 15 300 × 15 60 85 110 145 175 205 3.1 6.2 9.4 12.5 15.6 18.7 OPB-S5015W Part number Light color Conformity Material LED life Color Temp. Size [mm] Weight [g] Power dissipation [W] OPB-S10015W OPB-S15015W OPB-S20015W OPB-S25015W OPB-S30015W Sensing LED bar lighting OPB-S series LED controller Advanced OPPF series OPPF-30MN NPN OPPF-30MP PNP NPN PNP OPPF-30SN OPPF-30SP DC24V±10% PWM mode : 30W max. (2ch total), Strobe mode : 15W max. (each channel) PWM mode : 2.5A max. (2ch total), Strobe mode : 4.5A max. (each channel) Frequency : 20/50/100kHz (for strobe mode as well), Adjustable Duty maximum step : 1000 PWM mode : DC12V (DC11~18V for feedback control), Strobe mode : DC18V (DC16~22V for feedback control) Feedback OFF : 1.8A max. / Feedback ON : 2.5A max. 2ch Synchronous input : 2, Analog/Digital switch : 1 Voltage between common and input : 5V min. for ON / 1.2V max. for OFF (30V max.) Synchronous input : 2, Analog/Digital switch : 1 LED brightness (alarming is available with threshold) / LED temperature, Monitoring frequency : brightness: 21ms, Temp.: 105ms Pulse width : 10ìs~9.99ms (10ìs step, adjustable maximum step: 1000), Duty : 10% max. (output voltage is 12V when pulse > 1ms) ±1.5% max. Over current Over current Synchronous input response time : 24V input : OFF->ON : 5ìs / ON->OFF : 60ìs, 5V input : OFF->ON : 44ìs / ON->OFF : 41ìs Input impedance between common and input : 6.8kÙ, insulated by photo coupler, Other input response time: 5~13ms Voltage : 0~5V, Input impedance : 220kÙ (not isolated) LED output over current alarm : 1, Feedback alarm : 2, LED output busy : 2 Error: 1 (Logic: “LED output over current” or “LED over heat” or “Feedback error”) Open collector, 100mA Max./DC30V, Residual voltage : 1.0V max. Open collector, 100mA Max./DC30V, Residual voltage : 1.5V max. Over heat of internal circuitry (drop PWM duty to 25% when over 105�Ž) LED over heat, LED brightness alarm when lower than threshold RS232 1ch, Baud rate : 4800/9600/19200/38400/57600/115200 IR communication : RS232 link to slave unit, Parallel I/F link to slave unit including brightness control and Bank switching, Transferring error status from slave unit to master unit, copying setup Communication cycle : approx. 25ms 0~45�Ž / 35~85%/RH (without condensation) 0~40�Ž / 35~85%/RH (without condensation) -20~70�Ž / 35~95%/RH (without condensation) -20~70�Ž / 35~95%/RH (without condensation) 10~55Hz 1.5mm X, Y, Z 2hours 10G X, Y, Z 3 times 10~55Hz 1.5mm X, Y, Z 2hours 10G X, Y, Z 3 times 10MÙ min./DC500V Housing : PC IP20 CE, RoHS Instruction manual in CD-ROM 385g 375g Par t number Type Power supply LED output Power dissipat ion OPB-S5015W OPB-S10015W OPB-S15015W OPB-S20015W OPB-S25015W OPB-S30015W : 50 × 15mm : 100 × 15mm : 150 × 15mm : 200 × 15mm : 250 × 15mm : 300 × 15mm OPPF-30MN : master unit NPN OPPF-30MP : master unit PNP OPPF-30SN : slave unit NPN OPPF-30SP : slave unit PNP Patent pending Line up Output power Output vol tage Output cur rent PWM cont rol Moni tor ing Input Analog input Insulat ion impedance FB cont rol accuracy St robe cont rol Parallel input for brightness control: 10 (4 are used for switching Bank) Write signal for parallel input : 1, Channel switch : 3 Output LED output protect ion Output protect ion Other protect ion Communicat ion I /F Operat ing Temp. /Humid. Storage Temp. /Humid. Operat ing Temp. /Humid. Storage Temp. /Humid. Vibrat ion resistance Shock resistance Vibrat ion resistance Shock resistance Communicat ion between Master and slave Mater ial Weight Protect ion category Conformi ty Accessor ies * Dimensions are on the page 3 * Dimensions are on the page 6 Power supply 10k hours when brightness drops 10% / 100% duty, 30 deg.C (typical) Heat transition sheet: Silicon rubber Accessories Diffuse plate (60%, 80%), Transparent cover, Polarizing plate, Bracket