MVS controller support Bar Code Reader - Optex FA - #1

Text version of the page

Use by 2011.03.01 3 Bank switching by Bar code reader Verification between printing and bar code or 2D bar code OK NG MVS controller switches the Bank with the bar code MVS-OCR has 32 Banks for 32 parameter setups that can be switched automatically by code input from bar code reader through RS232 I/F. This function prevents errors caused by human careless miss. What you have to do is just let bar code reader read the code to change the Bank. Normally, you had to have PLC not only OCR camera and code reader to verify printing with the code. Now, you can verify printing with the code utilizing MVS-DN controller without any PLC that means you can reduce cost and time for building up the verification system. Product code: Shelf life: Just scan the code when change the product ** You have to setup parameters for each Bank beforehand MVS controller receives the code and change the Bank Bank is switched 4912345678901 2011-09 9R2A01 MVS-OCR Bar code MVS-DN reader MVS-OCR MVS-DN Bar code reader 1 2 Use by 2011.03.01 Use by 2011.03.01 Use by 2011.02.08 Use by 2011.08.01 Use by 2011.05.01 Example: 1 week life 1 month life Example: 3 Months life 6 months life Lot number: Code Characters Product code: 1102