| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Specular Type Amplifier • CD4A-LN (NPN) • CD4A-LA (PNP) Sensor head • CD4-L25 25±1mm | | |
| | | Light Intensity Monitor (For specular type only) | | |
| | | |
| | | Visible light intensity For exact and stable measuring you need to set the best light intensity. You can monitor the status with the built-in display. | | |
| | | HQ | | |
| | | |
| | | Red line on measuring point | | |
| | | |
| | | |
| | | |
| | | Specular angle, best for glass material | | |
| | | |
| | | Threshold of receiving light intensity | | |
| | | |
| | | Furhter from head | | Closer to head | | |
| | | |
| | | Blue wave means reflection from the object. Convenient to find the peak reflection. | | |
| | | |
| | | Dimensions | | |
| | | |
| | | Linearity by material | | |
| | | CD4-L25 | | |
| | | |
| | | Option:Extension cable to connect the sensor head * mam
| | |
| | | |
| | | |
| | | +0° (Typical) | | |
| | | | | | | | | | Length (L) | Cable type | | | | 2m | CD4CN-S-ROBOT | | | | 5m | CD4CN-5S-ROBOT | | | | | | | | | |
| | | |
| | | |
| | | | | |
| | | 24 24.2 24.4 24.6 24.8 25 25.2 25.4 25.6 25.8 26 Distance (mm) | | 24 24.2 24.4 24.6 24.8 25 25.2 25.4 25.6 25.8 26 Distance (mm) | | |
| | | |
| | | |
| | | Specification Sensor head | | |
| | | ±0.2° LR (Typical) | | -0.2° (Typical) | | |
| | | |
| | | | | | | | | | | 0.4 | | | | | 0.3 | | | | | 0.2 s | | | | | 0.1 | | | | rity | 0 | | | | 3> | | | | | c | -0.1 | | | | | | | | | | -0.2 | | | | | -0.3 - | | | | | -0.4 | | | | | | | | | |
| | | |
| | | | | | | | | | Product Type | | | | | Measuring Range | 25+/-1 mm | | | | Light Source | | | | | Spot Size (see Remark 1) | 25 X 35 urn | | | | Linearity (see Remark 2) | ±0.1% FS | | | | Resolution (see Remark 3) | 0.1 urn | | | | | supplied by CD4A-LN/LP Controller | | | | Temperature Drift | ±0.01%FS/ C°,F° | | | | Laser Emission LED | Green = Laser emission | | | | Measurement LED | Red = Closer to sensor Orange = Middle of measuring range Green = further from the center Red/Green In turn = Out of measuring range | | | | Water tightness | IP67 | | | | Operation Temperature / Humidity | -10 to 45 °C (14to113F°), 35 to 85% RH | | | | Storage Temperature / Humidity | -20 to 60 t (-4 to 140 F°), 35 to 85% RH | | | | Ambient illuminance | Incandescent Lamp = Max 3,000 lux | | | | Vibration Resistance | 10 to 55 Hz double amplitude 1.5mm for XYZ | | | | Shock Resistance | 50G (050m/s2) | | | | Cable | 50cm (19.7 inch) cable | | | | Cable Extension | CD4CN-S-ROBOT (2m, 78 inch), CD4CN-5S-ROBOT (5m, 197 inch) | | | | Package Material | Aluminum diecast | | | | | | | | | |
| | | |
| | | 24 24.2 24.4 24.6 24.8 25 25.2 25.4 25.6 25.8 26 Distance (mm) - Mirror(SENS=MIN) | | 24 24.2 24.4 24.6 24.8 25 25.2 25.4 25.6 25.£ Distance (mm) - Glass(SENS=8) | | |
| | | |
| | | Spot size | | |
| | | Measuring Area | | |
| | | |
| | | |
| | | CD4-L25 | | CD4-L25 | | |
| | | |
| | | 120(im | | 35^m | | 100nm | | |
| | | |
| | | DI | | |
| | | |
| | | 17.5" H | | |
| | | 85nm | | 25nm | | 70|im | | |
| | | |
| | | |
| | | |
| | | Remark 1: Defined with center strength 1/e2 (13.5%). There may be leak light other than the spot size. The sensor may be affected when there is a highly reflective object close to the detection area. Remark 2: 256 times In average (using the special amplifier), object: White Ceramic. The value is subject to objects. Remark 3: The typical value in the conditions of 256 times in average (using the special amplifier), object: White Ceramic, distance range: Middle. The value is subject to objects. | | |
| | | 24 25 Distance (mm) | | 26 | | |
| | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |