Catalogue - Color Vision Sensor CVS1 - Optex FA

See other catalogues for Optex FA

LED lighting, Sensor, Through-beam sensor, Detector, Laser sensor

Text version of the page

Color Identity Sensor

CVS1 SERIES

CVS1-N10 View10° NPN P10 View10° PNP

CVS1-N20 View20° NPN P20 View20° PNP

CVS1-N40 View40° NPN P40 View40° PNP

Set Item List (patent applied)


		0-9999 (5000)
		0-9999 (0)
	BANK	0-17(17)
	BRIGHT	0-255 (100)
	COLOR	0-127 (20)
	COLRFIL	0-3 (0)

Sets the lower limit of the detection area. Sets the upper limit of the detection area. Sets the method to switch the bank number. Sets the brightness of the whole screen.

Sets the margin when the detection color is set as the representative value. Sets the color filter.

0: Converts the color ratio per each pixel. 1: Acquire the maximum luminance 2: High sensitivity mode of "0". 3: High sensitivity mode of "1".

Area lower limit Area upper limit Bank selection Screen brightness Color margin Color filter


Area hysteresis	HYSTRSY	0-200 (10)	Sets the hysteresis (0.1% unit of all pixels) of the area upper and lower limits.
Input constant	IN FILT	0-4 (4)	Sets the time constants of the bank switching signal and the external teaching signal.
Darkness correction factor	KIL BLK	0-31 (27)	Sets the ratio to correct the color darkness.
LCD Up/Down reverse	LCDVIEW	0, 1(0)	0: Normal LCD display
			1 Display is up/down reversed.
Area display max. value	MAXAREA	0-9999 (9999)	Sets the area maximum value.
OFF delay time	OFF DLY	0-5000 (0)	Turns OFF the output signal when the condition is not met for over this set time (ms).
ON delay time	ON DLY	0-5000 (0)	Turns ON the output signal when the condition is met for over this set time (ms).
One-shot output	ONESHOT	0, 1(0)	When set to "1", output signal is output by one shot during the OFF delay time after the output signal turns ON
Outside area range	OUTSIDE	0-3 (0)	0: Turns ON the output signal within the range between the area upper and lower limits.
			1: Turns ON the output signal outside the range between the area upper and lower limits.
			2: Same as "0". However, the bank switch 1 input becomes the output over the area lower limit value.
			3: Same as "1". However, the bank switch 1 input becomes the output over the area lower limit value.
Resolution	RESOLUT	0, 1 (1)	Sets the fineness of the pixels taken out of the image sensor.
Synchronous input delay time	SYNCDLY	0-255 (0)	Sets the delay time of a synchronous input signal.
Synchronous input	SYNCHRO	0-4 (4)	Sets a synchronous input signal.
Teaching function enables	TEACHEN	0-3 (0)	0: Change and movement of window.
			1: Prohibits change of image-taking range.
			2: Fixes the teaching window and the image-taking range.
			3: Prohibits teaching.
Teaching mode	TEACHMD	0-3 (0)	0: Performs normal teaching.
			1: Performs the dirt and character detection teaching.
			2: Similar to "0° under fixed brightness.
			3: Similar to "I", under fixed brightness.
Teaching margin	TEACH%	0-30 (15)	Sets the color detection range at teaching.
Temperature compensation level	TEMPCMP	0-255 (30)	The temperature compensation level of the image sensor.

Specification

CVS1-N10(NPN), CVS1-P10(PNP)

CVS1-N20(NPN), CVS1-P20(PNP)

CVS1-N40(NPN), CVS1-P40(PNP)

View angle

Object distance

Image-taking range *1

Light source

Power voltage

Resolution

Temperature drift

Lighting durability

Lighting luminance tolerance

Response speed

Output *5

Input

Ambient working temperature Ambient humidity range Material

Protection degree Weight K1: Tolerance: ±10%

JK2: When the set value of KIL BLK is "10" or more

Dimensions

210-270mm 40X50-55X65mm

White LED: 12 pes Current Max. 220 mA / 12 V DC, 120 mA/24 V DC. 8X16X3 (RGB) - 200X240X3 (RGB) ±2% of RGB each factor (O-401C) &2 Approx. 50000 hours «3 -70% - +100% &4 0.6—22 ms

NPN or PNP, Max. 100 mA, Residual voltage: 10V or less Bank switch input: 4 points (1 point is switched to the upper and lower limit terminal.)

o-4or

35-85%/RH ABS / acrylic fiber / polycarbonate IP67 Appprox. 180g

SK3: When luminance has dropped to 50% under the normal temperature and humidity circumstance SK4: Representative value when KIL BLK is set to "27"

Conection

33.8 4.2

Orange / Black : Bank switch 0 Yellow / Black : Bank switch 1 / Lower limit output Rose: Bank switch 2 / Teach input Purple : Bank switch 3 / Synchronous input Black: Output

Options

\2-^4.3

APPLICATION

CVS-M1 Remote Monitor (patent applied) CVS-LW1 External Lighting (patent applied) CVS-C3S

Extension Cable (3m)

Remote controller with TFT display.

Use this lighting where this sensor is mounted at a dark place, or stable result is not obtained due to Insufficient lighting. Four cables can be connected at a time. MAX 15m in total.

To Remote Monitor CVS-M1 or External Light CVS-LW1

Dimensions are common among CVS1 Main Body, CVS1-M1 andCVS-LW1.

# Specifications and technical information not mentioned here are written in Operation Manual. Or visit our website for getting details.

• All the warnings and cautions to know prior to use are given in Operation Manual.

OPTEXFACO..LTD.

46-1 Takehanadounomae-cho Yamashina-ku Kyoto 607-8085 Japan TEL+81-75-594-8123 FAX+81-75-594-8124 http://www.optex-fa.com

74534-01-0401

Color Vision Sensor CVS1 - Optex FA - #1

LED lighting, Sensor, Through-beam sensor, Detector, Laser sensor