Color Vision Sensor CVS1 - Optex FA - (Version JPG) - Page n° 4 - PDF Catalogue | Technical Documentation

See other catalogues for Optex FA

LED lighting, Laser sensor, Lighting, Displacement sensor, Color sensor

Text version of the page

Color LCD same as handy phone size.

Only 5 buttons mean everything for operation.

CVS I gives its technical advantages in fast response

and easy setting even under rough conditions of the surroundings.

Details of LCD Screen

CVS1, all-in-one shape

Color monitor 1.5 inch QVGA TFT CID

I— Lighting Longer lasting High-luminance white LED

Camera

© Image screen

The image taken by the built-in camera is displayed. © Mode display

"RUN' Is displayed in the Normal screen. ® Screen display status

Shows the display status when the display mode Is switched with [VIEW] button. © Bank number

Present bank number is displayed. (0~15) © Detection color

Detection color is displayed.

Indicates "Darkest color", "Middle color", and "Brightest color" from the left. © Area lower limit

Indicates the area lower limit of the detection color. ® Detection color area

Indicates the present area of the detection color.

Orange: within upper and lower limits

Green: Outside upper and lower limits

(Status with area hysteresis excluded) ® Area upper limit

Indicates the area upper limit of the detection color. © Output condition •: Output ON X: Output OFF

In the Set Value Reference screen and the Set Value Change screen, the contents of @, ©, and ® will change as required. ® Set item ® Set value

© Response time (Unit: 0.1 ms)

Normal screen

■ Light Lens

Set Value Reference screen

Special processor for parallel processing

CPU developed only for CVS series. Compact, low-heat, and low-cost are featured.

) UP button

Use to Increase a set value, etc. or change a set item.

) DOWN button

Use to decrease a set value, etc or change a set item.

) SET button

Use to display a set value.

Press for 3 sec. or more to enter a

revised set value

(ASIC)

2K C9

) TEACH button

Press for 3 sec. or more for teaching. Also, used to move the teaching window or change its size.

) VIEW button

Use to switch the display mode of the screen.

Principle of high-speed

Response time


	*Transfer time of image*
	*Writing down in the memory*	*Reading out*

		*Results determination*

Existing Image sensor

Field of view

Response

When mount the sensor

Mount the sensor leaned by 5°~45° so that lighting should not be reflected by a work. Detection may become successful by changing the angle to finds the best.

Tilt the sensor by 10°~40° to avoid the mirror reflection when a work is shiny. Take caution so that external lighting (light from fluorescent light, etc.) is not reflected.

The number implemented in the product type means angle to view. (f.i. CVS1-N20 views in 20 degree)

Transfer time of image

Process with color filter & correction factor Results determination

-Response-

CVS1 series

Not needed

CVS1-N10

(ASIC)

Principle of ln-operation adjustment

Each process is independent and work parallel. Delay of output will not be triggered even though in-operation.

CVS1-N20

CVS1-N40

Color Vision Sensor CVS1 - Optex FA - #4

LED lighting, Laser sensor, Lighting, Displacement sensor, Color sensor