Color Vision Sensor CVS1 EASY - Optex FA - (Version JPG) - Page n° 2 - PDF Catalogue | Technical Documentation

See other catalogues for Optex FA

Diffuse reflection sensor, Retro-reflective sensor, Background suppression sensor, Humidity sensor, Lighting

Text version of the page

Simple and Easy Setup

Self-contained all-in-one design

Simple Wiring

For those applications that have required multiple sensors, or when they cannot be used to solve the application.

The New CVS1 EASY Vision Sensor is now available, it features an easy to use Three Step Teaching set-up that can be

completed in a matter of minutes.

Stand-alone system does not require complicated wiring. Simply connect the power cable to the main unit of the CVS1 EASY.

If additional lighting is needed to illuminate the target connect the External Light CVS-LW1.

To setup or monitor the target remotely, simply connect the CVS EASY-M1 Remote Monitor. The CVS EASY-M1 has an LCD display and all control functions can be accessed.

CVS1 EASY

CVS-LW1 CVS EASY-M1

Front

Back

Three Step Teaching

Light

Setup can be completed in 30 seconds.

The Teach-in process is as simple as that of a photosensor.

LDC display

Camera

Start by going to the Teaching Mode.

Use the Zoom In / Zoom Out to set the view area. There are 20 steps of zoom to set the field of view.

Determine the color to detect. Move the arrow to the area where the color is located.

® A maximum of three CVS-LW1 external lights can be connected to the CVS1 EASY.

© The CVS EASY-MI remote monitor can be used up to 15 meters away from the sensor by using the CVS-C3S extension cable (a maximum of 4 cables can be connected in series).

(D The CVS EASY-MI remote monitor has a 3 meter cable (standard).


	.., CVSleasy-NlO
	l'"v ICI J *.-'1* *t'-'* Jv *trtW* 5«ntó YEifa* isrm rase Dirki *»rto* SrncT *nut:* :..r lu.:*
		05 51F
		OPTE» FA CO.,LTD.

Operation buttons

POWER

BPNKiCi BODO TI] i

Professional parameters - For more convenience

Power supply, Input/Output wire

As you become more familiar with the operation of the CVS1 EASY,

there are adjustment parameters that can be used to change the operation of the sensor.

External connector

Table of Settina Value

Remote Monitor CVS1 EASY-M11 External light CVS-LW1 Luminescent light CVS-LU1 Extension cable CVS-C3S


		Setting range (Default)
Brightness	BRIGHT	0 to 255 (100)	Specifies the brightness of the screen (shutter time). The optimal value is set at teaching. The shutter time is calculated with "the setting value x 54.5u.s."
Initializing setting value		NO,YES (NO)	Initializes all the set values in writing with the set value set to "YES."
Off delay		0 to 5000 (0)	Sets the Off delay time of output. When set to one shot (ONESHOT = ON), the oneshot output time is selected. (Unit: ms)
On delay		0 to 5000 (0)	Sets the On delay time of output. (Unit: ms)
One shot	ONESHOT	OFF, ON (OFF)	Switches to the oneshot output. The time to be turned ON Is specified at the set value of OFF DLY.
Output reverse	OUTSIDE	LOW, HIGH (LOW)	Switches the relationship between the area and the output. LOW: The output turns on when the current area Is at the area lower limit or more. HIGH: The output turns on when the current area is at less than the area lower limit.
Resolution	RESOLUT	LOW, HIGH (LOW)	Specifies the resolution of shooting screen. LOW: Reduces the horizontal direction of screen to the half resolution and cuts the response time to half. HIGH: Shoots at a high resolution. To be used to judge the slight color difference.
Synchronous input		OFF, ON (OFF)	OFF: Shoots continuously. ON: Shoots once at the rising of synchronous input line (purple).

ilfiHK : 0 43G

F • s^g man

TEACHING

-^Then, TEACH-IN is complete,

Precise Setting

Store up to 8 complete sets of parameters

If the sensitivity needs to be adjusted, the Color and Area can be changed by using the buttons on the CVS1 EASY.

A maximum of 8 banks are available to store settings. Product changeover Is fast and easy

Cable function and bank number

Color button

Area button

Line color

Signal

Bank No.

Brown

12-24 V DC

Blue

Orange / Black

Bank switch 0

OFF

Yellow / Black

Bank switch 1 / Lower limit output

OFF

Rose

Bank switch 2 / Teach input

OFF

Purple

Synchronous input

Black

Output

NPN : OPEN or connect with the brown line.

PNP : OPEN or connect with the blue line.

OFF

NPN : connect with the blue line. PNP : connect with the brown line.

^ Complete.

is displayed in yellow: the setting item is common to all banks.

is displayed in purple: the setting item switches to the specific value of each bank.

LCD Disp

Color Vision Sensor CVS1 EASY - Optex FA - #2

Diffuse reflection sensor, Retro-reflective sensor, Background suppression sensor, Humidity sensor, Lighting