| Output is not correctly done. £-k OUTSIDE (outside area range) may be set to "1" or "3." • Output turns ON at the range beyond the area limits when OUTSIDE is set to "1" or "3." Normally, set it to "0." f-k ONDLY (ON delay) may be set to a great value. • If the ON delay time is long, it takes time to turn ON the output signal, and longer OFF condition may be regarded as OFF by mistake. Normally, set it to "0." ONESHOT (One-shot) may be set to "1." • When OFFDLY (OFF delay) is set to a small value and ONESHOT is set to "1," the output signal is output only for a very short time. • Normally, set ONESHOT to "0" or set OFFDLY (OFF delay) to a greater value as necessary if one-shot output signal is going to be used by setting ONESHOT to "1." tt-, Unchanged image remains in the screen. • There is no problem for the actual use. £-t There may be defected pixels with LCD screen. • There is no problem for the actual use. f-k There may be noise elements with the image sensor. • Fixed noise pattern of the image sensor tends to appear as the temperature rises. In such a case, lower the ambient temperature. • Set COLRFIL (color filter) to "0" or "1" to reduce noise elements. |