| Image-taking range is narrow, and image is zoomed in. f-L Return the image-taking range to its original setting by teaching. • Display ^ZOOMl| in the Teaching Setting screen, and reset the zoom-in display by pressing ^yfj^. See "1-point Teaching" on Page 14. G Image-taking range cannot be changed by teaching. £i TEACHEN (teaching function enable) may be set to "1" or "2." • Normally set it to "0." f-L The teaching window may be too small. • Display ESIZE| or E'SIZE in the Teaching Setting screen, and increase the size of the teaching window by pressing . See "1-point Teaching" on Pagel4. G Position of the teaching window cannot be changed. ^ TEACHEN (teaching function enable) may be set to "2." • Normally set it to "0." C Teaching cannot be executed. (No response is made even when @ is pressed for 3 seconds or more.) TEACHEN (teaching function enable) may be set to "3." • Normally set it to "0." & Area value shifts after teaching is executed. fii The upper and lower limit teaching is executed if AREA HI (area lower limit) is set to a value other than "0." • Normally set it to "0." |