| (r, Color cannot be correctly detected by teaching. f-t TEACHMD (teaching mode) may be set to "1" or "3." • Normally, set it to "0." The teaching window may be too large, protruding beyond the color to be detected. • Display F^SIZEl or E'SIZEl in the Teaching Setting screen, and reduce the size of the teaching window by pressing ^jjf. See "1-point Teaching" on Pagel4. f-k The set value of TEACH% (teaching color margin) may be too great, enlarging the color selection range. • Normally, set it to "10" to "20. " Lighting may be OFF. • Set LIGHT (lighting control) to 1 or add an external lighting. fi-k Is there any white reference object at the right edge of the screen when COLRFIL (color filter) is set to "1"? • Place a white object (not shiny object) at the right edge of the screen. The set value of KIL BLK (darkness correction factor) may be extremely great. • When COLRFIL (color filter) is set to "0" or "2" and the value of KILBLK is too great, everything becomes white when black and gray are detected. |