| • Do not disassemble nor modify the device. Otherwise, it may cause a fire or an electric shock. • Continuing to use the device under abnormal conditions, such as those with abnormal smell or smoke, may cause a fire or an electric shock. In such cases, immediately pull out the power plug and confirm that the abnormal condition is removed, and then contact us or our sales representative. Never repair the device by yourself since it is dangerous. Do not use the device by a power voltage outside 12-24 V DC. It may cause a fire or an electric shock. Avoid wiring a cable and high-voltage or power cable in parallel or wiring them in a same piping. It may cause a malfunction of the device. Do not mount the device at any one of the following places to use this product properly and safely. If not observed, it may cause a fire, an electric shock, or a failure. • Place at high prospective humidity • Place at high prospective temperature (where the device is subject to direct sunshine) • Dusty place • Place with insufficient ventilation • Place where static electricity is likely to be generated • Place involving corrosive or flammable gases • Place where the device is subject to water, oil, and /or chemical splashes • Place with direct vibration and impact Do not handle electric cables as follows. Otherwise, cables may be damaged, resulting in a fire or an electric shock. • Damage • Torture • Pull • Twist • Bundle, • Put heavy stuff Do not touch the device or its cable with wet hand. Otherwise, it may cause an electric shock. |