Color Identity Sensor - Optex FA

Catalogue Color Identity Sensor

www.optex-fa.com

Page

/ 48

/ 48

See other catalogues for Optex FA

Text version of the page

CHANGING SET VAL UE

Function name

Setting range (Initial value)

Explanation

LCD display

0 : Normal LCD display

1 : Display is up/down reversed. Make this setting when mounting this device upside down. The display of the external monitor reverses only the image screen.

LCD Up/Down

reverse*

0, 1

(0)

LCDVIEW

Sets the area maximum value. When the upper and lower limits exceed this maximum value at teaching, it is considered that the maximum value is set. Used when unit is converted.

Area display max. value

0 - 9999 (9999)

MAXAREA


OFF delay time		0 - 5000 (0)
	OFF DLY	0 - 5000 (0)
ON delay time		0 - 5000 (0)
	ON DLY	0 - 5000 (0)
One-shot output		0, 1 (0)
1	ONESHOT

Turns OFF the output signal when the condition is not met for over this set time (ms).

Turns ON the output signal when the condition is met for over this set time (ms).

When set to " 1 " output signal is output by one shot during the OFF delay time after the output signal turns ON.

⁴

0 : Turns ON the output signal within the range between the area upper and lower limits. Turns ON the output signal outside the range between the area upper and lower limits.

Same as "0." However, the bank switch 1 input becomes the output over the area lower limit value.

Same as "1." However, the bank switch 1 input becomes the output over the area lower limit value.

Outside area range *^;

0 - 3 (0)

OUTSIDE

*5: • The output signal is reversed when OUTSIDE is set to "1" or "3." At this time,

when either one of "OFF delay," "ON delay" or "One-shot" is set to a value

other than "0," the area hysteresis will become "0." • The device works with its output signal ON immediately after the teaching or

the power ON when OUTSIDE is set to "1" or "3" and none of "OFF delay,"

"ON delay" and "One-shot" is used. *: Patent is being applied.