| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | installation | | |
| | | design | | |
| | | |
| | | |
| | | The Optex Mirage is simple to install. All the settings are mechanically adjustable with dipswitch and levers. The smart design makes that the engineer can easily reach the sensor in case adjustment of a setting is necessary. | | |
| | | The Optex Mirage is designed for installation in the header of the door operator or as a ceiling mount sensor. Due to its recessed mounted design and the 2 rows of presence detection, this sensor is an elegant and safe solution for installation in the ceiling of curved doors. | | |
| | | |
| | | |
| | | I conditions | | |
| | | |
| | | Safety is assured by the two rows of presence detection closest to the door. The sensor detects a person or object and holds the door open as long as they are in the presence areas, even if they stop or pause. Of course the Optex Mirage can also be used as presence detection sensor only, for example as a rear edge safety sensor. | | |
| | | Snow mode and variable sensit | rivfty adjus' | | |
| | | ments
| | |
| | | | |
| | | |
| | | make this sensor suitable for ^vefy application and even extreme weather conditions. | | |
| | | |
| | | |
| | | Active Infrared Door Sensor | | |
| | | |
| | | Model Mounting height Detection area Detection method Detection angle adjustment | | |
| | | Mirage max. 3.0 m See detection area chart Active infrared reflection method ±4° adjustable by steps of 1 degree (deep/shallow) 12 - 30V AC/DC 200mA max. (at 12V DC) Green: Standby Red: 1st Row detection active Orange: Other rows detection active Form C relay 50V, 0.3A max. 0.5sec. -20°C - +55°C 244 x 52.5 x 43 mm (w x h x d) 260 g 3 m Connection cable, area adjustment tool | | |
| | | c o ■p u | | |
| | | |
| | | u a LO | | |
| | | |
| | | Power supply Current draw Operating indicator | | |
| | | |
| | | Output contact Relay hold time Operating temperature Outer dimensions Weight Accessories | | |
| | | Area depth B (presence detection) Area depth D (presence and motion detection) Area width E Distance to mounting surface F | | |
| | | 0.47 0.53 0.57 0.64 0.94 1.07 1.15 1.28 | | |
| | | |
| | | |
| | | 1.65 1.88 2.03 2. | | 25 | | |
| | | |
| | | |
| | | 2.28 2.59 2.80 3. 0.23 0.26 0.28 0.31 | | |
| | | |
| | | |
| | | The actual detection area may differ according to the size/material/ entry speed of the object and the installation environment. | | |
| | | |
| | | □PTEX | | |
| | | | | | | | | | | 03, V UKAS IJ*.«ITY M4N'4£>IMI\t | | | | | 001 | | | | | | | | | OPTEX CO., LTD 5-8-12 Ogoto Otsu, 520-0101 Japan PHONE: +81 (0)77-579-8700 FAX: +81 (0)77-579-7030 WEBSITE: www.optex.co.jp | | |
| | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |