Reagent Pump - OPAM Instruments - #2

Suitable for practically all types of clear liquids and gases

Flow rate from 0,05 ul/min up to 100 ml/min, depending on the syringe size

Continuous smooth delivery during minutes, hours and days

Pumping against pressure, depends mainly on the syringe size, up to 5-8 bars

Programmable 12V outputs, 2 - 4 pieces depending on the pump configuration

Analogue 0 - 5V inputs, 2 pieces

Flexible software to control pumping periods, external valves and outputs

Ten different programs each with ten operations can be stored

All wetted surfaces are glass PTFE, PFA or PEEK

Standard syringe sizes 100, 250, 500 ul and 1, 2.5, 5, 10, 25 ml

PTFE tubing size: o.d. 1.6 mm, i.d. typically 0.8 mm or 1.0 mm or

o.d. 3.2 mm, i.d. 1.6 mm or 2.4 mm Control unit: Local keyboard 2*4*4 buttons and 2*40 characters LCD Possibility to pump in inert or ventilated atmosphere due to closed acrylic Pump Head. Also liquid spilling is efficiently prevented. Computer connection via RS232 and USB using an RS/USB adapter cable External power supply 12 VDC.

OPAM Syringe Pump range consists of several models which have been designed following user needs and wishes.

The base of all OPAM Syringe Pumps is a continuous low syringe pump, which delivers one or two liquids during the same pumping period. The controller and liquid handling pump heads are separate units and connected with a cable.

OPAM Syringe Pumps can be used safely with practically all chemical liquids used in laboratories, because gas tight glass syringes are used and all wetted materials are glass, PTFE, PFA or PEEK. No leakages will be obtained due to gas tight inert syringes, tubes and valve fittings. All tubes can be fitted tightly by fingers and no additional tools are needed.