Linear - Ondrives - #29

Drylin® T Linear Bearings

with High Performance Polymers

The Iglidur J material with hard anodised aluminium achieved the best results by far in our tests.

Comprehensive investigations showed that for the relevant loads of linear guides the slide bearings made of Iglidur J are the most suitable.

They offer the greatest wear resistance and at the same time guarantee very favourable abrasion values.

Compared to slide partners made of hardened steel it even proved possible to further improve the abrasion resistance by a factor of 3 using gliding partners made of hard anodised aluminium.

• very low abrasion values during dry operation

• excellent wear resistance

• maintenance-free operation

• vibration damping

• very low moisture absorption

Iglidur J slide bearings can be used under temperatures of -40° to a maximum of +90°C. The excellent heat conduction of the aluminium rail means that it is only necessary to take note of the generated friction heat during very high speeds for prolonged periods of time.

Iglidur J is resistant to weak acids, diluted alkalis, as well as fuels and all types of lubricants.

The very low moisture absorption allows them to be used in wet or moist environments.

Shaft CF53 / different

polymers

dry application

v=0.25m/s, p=1N/mm²

E E

Iglidur Iglidur L100 W300

Iglidur J

Iglidur G

A

Shaft CF53 / different

polymers

dry application

v=0.25m/s, p=1N/mm²

E E

s

Hard-

CF53

X105

AL

anodised with PTFE

Hard-

anodised AL

The resistance to alkalis allows them to be used in applications in which plants or parts of them have to be frequently cleaned.

S sales@ondrives.com _B5_B www^.ondrives.com