Fasteners - Ondrives - (Version JPG) - Page n° 39 - PDF Catalogue | Technical Documentation

See other catalogues for Ondrives

Ball joint, Lead screw, Bearing unit, DC gearmotor, Disc coupling

Text version of the page

Well Nuts®

Threaded Inserts

secure online ordering

How to install:

1. Place the Well Nut® insert all the way into a pre-drilled hole until the flange is firmly against the mounting surface.

2. Pass machine screw through part to be fastened and tighten until snug.

Grip range

Discounts: 50+ -20% || 100+ -30% || 200+ -35% 1500+ -40%


Part Number	Flange Type	Grip Range	Hole Size 0d	Head Dia. 0D	Head Height h	Body Length L	Min. Screw Length	Plate Thickness*	*Tightening torque Nm**	Ultimate Tensile (N)*	Price Each 1 - 49
WN-M3A* Standard		0.4-4.0	8.00	11.5	1.60	11.1	12.7+T	1.57	0.45	■507	£0.71
WN-M4A* Standard		0.4-4.0	8.00	11.1	1.30	11.4	12.7+T	1.57	0.34	■649	£0.81
WN-M5C* Standard		0.4-5.0	9.60	12.7	0.90	13.2	14.1+T	3.18	0.56	1023	£0.91
WN-M5D*	Large	0.8-5.8	9.60	19.1	4.80	15.8	20.5+T	3.18	0.56	1232	£1.00
WN-M5E* Standard		0.9-5.9	9.60	14.3	1.00	15.9	16.9+T	3.18	0.56	1179	£1.05
WN-M5F*	Large	0.8-5.8	9.60	19.1	2.00	15.8	17.8+T	3.18	0.56	1001	£1.05
WN-M5H* Standard		8.0-16.0	9.60	14.3	1.30	25.4	26.7+T	12.70	0.34	1401	£1.18
WN-M6A* Standard		0.4-2.6	12.80	16.0	1.30	14.7	16.0+T	1.91	1.13	1023	£1.20
WN-M6C* Standard		4.8-8.7	12.80	16.0	1.30	19.0	20.3+T	4.75	1.13	1601	£1.60
WN-M6D* Standard		6.4-11.8	12.80	16.0	1.30	25.4	26.7+T	6.35	1.13	1979	£1.35
WN-M8A* Standard		0.4-4.0	15.90	22.2	3.20	15.2	18.4+T	3.84	2.82	2033	£2.69

Material

Flanged neoprene bushing with a brass machine nut moulded into one end. Tightening a conventional machine screw threaded in a brass nut causes the insert to expand, making a secure fastening.

Test Results

* WARNING : Installation instructions and warnings packaged with the products must be followed precisely or performance may vary significantly from the data given here. All tests were performed in CRS plates using hardened steel plates. Average ultimate load values shown above should be used only as a guide. Actual results may vary, and are dependent on such factors as proper installation, proper application, and type of base material. In all applications, it is recommended that tests to stimulate actual conditions be carried out to determine the suitability of the products for the particular application. Also, a suitable factor of safety should be applied to obtain safe working loads. For insert applications, burrs must be removed from the base material prior to installation.

* Minimum order quantities of 50 for non-stock items - contact Sales for availability

ondrives

+44 (0)1246 455500 +44 (0)1246 455522

H sales@ondrives.com A www.ondrives.com

Product information updated 1st April 2008 and subject to change. Please contact Sales for an accurate price and delivery.

Fasteners - Ondrives - #39

Ball joint, Lead screw, Bearing unit, DC gearmotor, Disc coupling