H8PS Cam Positioner
32Pages

{{requestButtons}}

Catalog excerpts

H8PS Cam Positioner - 1

Cam Positioner H8PS CSM_H8PS_DS_E_4_1 This Compact Cam Positioner, Popular for Its Ease-of-use, Now Comes with Even Better Functions. • Compact 8-, 16-, and 32-output Models available that are 1/4DIN size at 96 x 96 mm. • High-speed operation at 1,600 r/min and high-precision settings to 0.5° ensure widespread application. • Highly visible display with backlit negative transmissive LCD. • Advance angle compensation function to compensate for output delays. • Bank function for multi-product production (8 banks). (H8PS-16@/-32@ models.) • Speed display and pulse output. • Approved standards: UL/CSA and EMC. Refer to Safety Precautions for All Counters and Safety Precautions on page 18 and 19. Features Models with 8, 16, or 32 Outputs Speed Display and Speed Alarm Output The lineup includes Models with 32 outputs in a compact 1/4-DIN size. Using the optional Parallel Input Adapter (Y92C-30) enables expanding to up to 64 outputs for one encoder to support anything from a simple positioning application to a large-scale system. Both the speed (rotations/minutes) and present angular position can be displayed at the same time. Alarm outputs can be produced for both upper and lower speed limits. 1 2 7 RUN 8-output Models 16-output Models 32-output Models Speed 96 mm CAM 1 2 RUN Large, Backlit Negative LCDs Large LCDs, red for the process value and green for set values, show a wealth of operation information, making operating status visible at a glance. High Speed Up To 1,600 r/min High Precision Up To 0.5° (at 720 Resolution) High-speed, high-precision applications can be easily handled and productivity increased. Bank Function for Multi-product Production Up to eight different programs can be registered in advance to enable fast and easy switching between products (16/32-output Models only). USB Communications for Easy Setting from a Computer Optional Support Software can be used to enable programming from a personal computer via USB communications. Programs can be easily copied, saved, printed, and much more. Upper limit Lower limit Upper limit alarm output Lower limit alarm output 7 Simple Programming The programming method is designed based on a one key-one action concept for settings that could not be simpler. Both initial settings and factory adjustments are effort-free. Speed STEP Switchable 96 mm s Error Present angular position Speed CAM STEP Present angular position Advance Angle Compensation Function to Compensate for Output Delays The advance angle compensation (ADV) function automatically advances the ON/OFF angle of outputs in proportion to machine (encoder) speed to compensate for the delay in timing of ON/OFF operation. ADV values can be set individually for 7 cam outputs. Cam program settings 100° 8° compensation 180° At high-speed (400 r/min) 92° 172° Pulse Output for Timing Control The number of pulses per rotation and the pulse output start angle can be set to enable operations like adjusting timing with a PLC or outputting to a rotation meter. Pulse output PLC Rotation meter 1

Open the catalog to page 1
H8PS Cam Positioner - 2

H8PS Model Number Structure ■ Model Number Legend H8PS-@@@@ 1 2 3 4 1. Number of outputs 8: 8 outputs 16: 16 outputs 32: 32 outputs 2. Panel language B: English 3. Mounting method None: Flush mounting F: Surface mounting/ track mounting 4. Output configuration None: NPN transistor output P: PNP transistor output Ordering Information ■ List of Models Cam Positioner Number of outputs 8 outputs Mounting method Flush mounting Surface mounting/ track mounting 16 outputs Flush mounting Surface mounting/ track mounting 32 outputs Flush mounting Surface mounting/ track mounting Output configuration...

Open the catalog to page 2
H8PS Cam Positioner - 3

H8PS Specifications ■ Ratings Item H8PS-@B H8PS-@BF Rated supply voltage Operating voltage range Flush mounting Power consumption H8PS-@BFP 85% to 110% of rated supply voltage Mounting method H8PS-@BP 24 VDC Approx. 4.5 W at 26.4 VDC for 8-output models Approx. 6.0 W at 26.4 VDC for 16-/32-output models Inputs Surface mounting, track mounting Flush mounting Encoder input Connections to a dedicated absolute encoder External Input inputs signals Surface mounting, track mounting 8-output Models: None 16-/32-output Models: Bank inputs 1/2/4, origin input, start input Input type Outputs Cam...

Open the catalog to page 3
H8PS Cam Positioner - 4

H8PS ■ Characteristics Setting unit 0.5° increments at a resolution of 720, 1° increments at a resolution of 256 or 360 (See note 1.) Number of steps Up to 10 steps can be set for each cam to turn the output ON/OFF 10 times. (See note 2.) Inputs Connections to a dedicated absolute encoder • Response rotation speed (in Run/Test Mode) 1600 r/min max. at a resolution of 256 or 360 (1200 r/min max. if ADV function is set for 4 or more cams) (See notes 3 and 4.) 800 r/min max. at a resolution of 720 (600 r/min max. if ADV function is set for 4 or more cams) • Includes error data detection...

Open the catalog to page 4
H8PS Cam Positioner - 5

H8PS ■ Functions Item H8PS-8@ H8PS-16@ H8PS-32@ Encoder rotation direction switching Encoder data can be set with a DIP switch to forward (CW) or reverse (CCW) direction. Encoder origin designation The present display angular The present display angular position can be set to 0° (origin) by using the position can be set to 0° (origin) by origin input terminal or the ORIGIN Key on the front panel. pressing the ORIGIN Key on the Note: All banks use the same origin. front panel. Angle display switch Converts the Absolute Encoder value display from 256 divisions/revolution to 360°/revolution....

Open the catalog to page 5
H8PS Cam Positioner - 6

H8PS Connections ■ Terminal Arrangement Alignment markings Not used Not used Not used Bank 4 Origin 24 VDC + − Start Pulse output RUN output Encoder H8PS-16@/-32@ (16-/32-output Models) NPN Output, Flush Mounting H8PS-16@/-32@ COM Bank 1 Bank 2 H8PS-8@ (8-output Models) NPN Output, Flush Mounting H8PS-8@ 6 7 8 9 10 11 12 13 9 10 11 12 13 (Rear view) (Rear view) Cam 8 Not used Not used Not used Start Bank 4 Origin Pulse output RUN output 24 VDC + − NPN Output, Surface Mounting H8PS-16@F/-32@F COM Bank 1 Bank 2 Cam 7 Cam 6 Cam 4 Cam 5 Cam 3 Cam 2 Cam 1 Encoder Encoder Alignment markings...

Open the catalog to page 6

All OMRON catalogs and technical brochures

  1. D4F

    8 Pages

  2. D4GS-N

    11 Pages

  3. E4E2

    5 Pages

  4. G9SE Series

    20 Pages

  5. NX-SL/SI/SO

    20 Pages

  6. G9SP

    28 Pages

  7. G9SX-SM

    24 Pages

  8. G9SX-SM/LM

    9 Pages

  9. G9SX/G9SX-GS

    49 Pages

  10. G9SX-LM

    28 Pages

  11. G9SB

    10 Pages

  12. G9SA

    16 Pages

  13. DST1 Series

    5 Pages

  14. WS02-CFSC1-E

    3 Pages

  15. G9SA-300-SC

    9 Pages

  16. K8AK-AS

    12 Pages

  17. K8AK-AW

    16 Pages

  18. K8AK-VS

    12 Pages

  19. K8AK-VW

    12 Pages

  20. K8AK-PH

    12 Pages

  21. K8DS-PH

    12 Pages

  22. K8AK-PM

    16 Pages

  23. K8DS-PM

    12 Pages

  24. K8AK-PA

    12 Pages

  25. K8DS-PA

    12 Pages

  26. K8AK-PW

    12 Pages

  27. K8DS-PU

    12 Pages

  28. K8DS-PZ

    12 Pages

  29. K8AK-TS/PT

    12 Pages

  30. K8AK-LS

    12 Pages

  31. K8AK-TH

    12 Pages

  32. K2CM

    16 Pages

  33. SE

    15 Pages

  34. SAO

    13 Pages

  35. APR-S

    6 Pages

  36. XS5

    25 Pages

  37. XS2

    29 Pages

  38. F92A

    4 Pages

  39. GLS

    3 Pages

  40. TL-L

    5 Pages

  41. V680 series

    68 Pages

  42. V680S Series

    68 Pages

  43. MY

    35 Pages

  44. E3NC-L/-S

    16 Pages

  45. NE0A-SCPU01

    6 Pages

  46. LY

    14 Pages

  47. G2R-[]-S

    11 Pages

  48. G7T

    7 Pages

  49. G2A

    9 Pages

  50. G2A-434

    7 Pages

  51. G2AK

    7 Pages

  52. MK-S

    9 Pages

  53. MK-S(X)

    12 Pages

  54. MM

    17 Pages

  55. MMK

    14 Pages

  56. G4Q

    6 Pages

  57. G7Z

    9 Pages

  58. G7J

    10 Pages

  59. E4B

    12 Pages

  60. E4A-3K

    9 Pages

  61. E4C-UDA

    5 Pages

  62. E6H-C

    5 Pages

  63. E6F-C

    5 Pages

  64. E6D-C

    5 Pages

  65. E6B2-C

    5 Pages

  66. E6A2-C

    5 Pages

  67. NL

    8 Pages

  68. VB

    5 Pages

  69. SC

    5 Pages

  70. D5F

    5 Pages

  71. D5A

    8 Pages

  72. E3S-GS3E4

    3 Pages

  73. E3S-R

    11 Pages

  74. E3S-A

    21 Pages

  75. E3S-CL

    9 Pages

  76. E3ZM-C

    14 Pages

  77. E3T Data Sheet

    26 Pages

  78. E3T Series

    6 Pages

  79. G5 Series

    59 Pages

  80. Sysmac Catalog

    410 Pages

  81. VT-X700

    6 Pages

  82. E5AC-T

    8 Pages

  83. CP1

    12 Pages

  84. CP1E

    12 Pages

  85. MS4800

    40 Pages

  86. VC-DL100

    6 Pages

  87. FZ4 Series

    42 Pages

  88. ZG2

    16 Pages

  89. ZS Series

    32 Pages

  90. ZW Series

    24 Pages

  91. E9NC-T

    2 Pages

  92. CompoNet

    28 Pages

  93. NT series

    18 Pages

  94. E2EF

    8 Pages

Archived catalogs

  1. Vision Systems

    20 Pages