MIA1-G2 Clamping force blocks, hydraulic, centric clamping
6Pages

{{requestButtons}}

Catalog excerpts

MIA1-G2 Clamping force blocks, hydraulic, centric clamping - 1

Gripping systems and automation Gripping systems and automation www.omil.it www.omil.it info@omil.it info@omil.it Basi statiche di bloccaggio, idrauliche, autocentranti - MIA1-G2 Clamping force blocks, hydraulic, centric clamping - MIA1-G2 Kraftspannblock, hydraulisch, zentrisch spannend - MIA1-G2 Étaux de serrage, hydraulique, autocentreurs - MIA1-G2 Dati tecnici - Pressione d’esercizio: max 45 bar in idraulica (120 bar su richiesta) Precisione di ripetibilità: MIA1-G2- 20... 50 0.02 mm MIA1-G2- 54... 80 0.03 mm con 100 cicli Temperatura d’esercizio: da 5°C a 60° C Sistema di funzionamento: cinematica a piani inclinati con guida forzata e trasmissione della forza applicata alle superfici Apertura/chiusura parallela con corse totali dei carrellini da 6 a 72 mm Applicazione tramite: fori per spine H7 Materiale corpo: acciaio trattato Materiale parti funzionali: acciaio trattato Azionamento: olio filtrato (10 m) viscosità 46 mm2/s a 40° ISO VG; max 60° C; Attacchi: laterali - base Manutenzione: lubrificare tramite ingrassatori ogni 5.000 cicli in lavorazione, ogni 100.000 cicli con presa di manipolazione Optional: controllo posizione dita mediante sensori di prossimità Technical data - Technische Daten - Données techniques - Pression de service: max 45 bar en hydraulique (120 bar sur demande) Précision de répétabilité: MIA1-G2- 20... 50 0.02 mm MIA1-G2- 54... 80 0.03 mm sur 100 cycles Température de service: de 5°C à 60° C Systéme de fonctionnement: piston et noix de commande à rampe Course parallèle des mors élevée de 6 à 72 mm Centrage par: trous pour goupilles H7 Matière des pièces fonctionnelles: Acier trempé et rectifié Matière du corps: Acier trempé et rectifié Fonctionnement: huile filtré (10 m) viscosité 46 mm2/s à 40° ISO VG; Max 60° C Conduites: sur la côté - sur la base Maintenance: lubrification par graisseurs d’huile tous les 5.000 cycles avec serrage de piéces à usiner, les 100.0000 cycles avec serrage de manipulation Accessoires: trous pour détecteurs Betriebsdruch: max 45 Bar hydraulisch (120 Bar auf Anfrage) Wiederholgenauigkeit:: MIA1-G2- 20... 50 0.02 mm MIA1-G2- 54... 80 0.03 mm über 100 Zyklen Betriebstemperaturbereich: von 5°C bis 60° C Kinematik/Futterkolben: Keilhakenprinzip, für hohe kraftübertragung und zentrisches Spannen Parallel Öffnen/Schliessen, Gesamthub der Schlitten 6 bis 72 mm Ausrichten der Gehäuse durch Verstiftung H7 Gehäuse und Funktionsteile aus gehärtetem Stahl Betätigung: hydraulisch über gefiltertes Öl (10 m) Viskosität 46 mm2/s bei 40° ISO VG; Max 60° C Druckluftanschlüsse: Über die Seitenflächen - Grundflächen Schmierintervalle: bei Einsatz auf Zerspanungsmachine alle 5.000 Schaltspiele, bei Handhabungsprozessen alle 100.000 Schaltspiele. Zubehör: Näherungsschalter Operating pressure range: max 45 bar with oil (120 bar on request) Repeatability accuracy: MIA1-G2- 20... 50 0.02 mm MIA1-G2- 54... 80 0.03 mm with 100 cycles Operating temperature range: from 5°C to 60° C Operating principle: wedge and piston design with mechanically restricted guidance Stroke range from 6 to 72 mm Mounting: by means of bores for H7 pins Housing material: hardened steel Material for functional parts: hardened steel Actuation: filtered hydraulic oil (10 m) viscosity 46 mm2 at 40° ISO VG; max 60°C /s Connections: sides - bases Maintenance: relubrified via lubrification-nipples, every 5.000 cycles for tool clamping, every 100.000 in handling Options: proxy switch adjustment 27 Via A. Via A. De FranciscoTel. +39.011.821.11.81 - Fax +39.011.895.44.62 - 10036 10036 Settimo T.se Italy - Italy De Francisco 128 - 128 - Tel.

Open the catalog to page 1
MIA1-G2 Clamping force blocks, hydraulic, centric clamping - 2

Gripping systems and automation Gripping systems and automation www.omil.it www.omil.it info@omil.it info@omil.it Basi statiche di bloccaggio, idrauliche, autocentranti - MIA1-G2 Clamping force blocks, hydraulic, centric clamping - MIA1-G2 Kraftspannblock, hydraulisch, zentrisch spannend - MIA1-G2 Étaux de serrage, hydraulique, autocentreurs - MIA1-G2 apertura opening öffnen ouverture chiusura closing schließen serrage Griffa di base SV Base jaw SV Grundbacke SV Mors de base SV Boccola per proximity Ø AA Bush for proximity Ø AA Näherungsschalter Ø AA Trous pour détecteur Ø AA Griffa di base...

Open the catalog to page 2
MIA1-G2 Clamping force blocks, hydraulic, centric clamping - 3

Gripping systems anO automation www.omil.it info@omil.it Basi statiche di bloccaggio, idrauliche, autocentranti - MIA1-G2 Clamping force blocks, hydraulic, centric clamping - MIA1-G2 Kraftspan nb lo ck, hydraulisch, zentrisch s/3 an nend - MIA 1-G2 Etaux de serrtge, hydraulique, autocentreues - MIA1-G2 Force de serrage o 45 bar (N) code 1 code 2 Peso del pezzo raccomandato (kg) cod. 1 cod. 2 max. empfohlenes Werkstuck-gewicht (kg) cod. 1 cod. 2 - /eso trasportabile calcolato con 1 = i.1 8 fs = 2. Con presa geometrica il vtlore potra essere incrementato. La forza di presa e la somma...

Open the catalog to page 3
MIA1-G2 Clamping force blocks, hydraulic, centric clamping - 4

www.omil.it info@omil.it Gripping systems and automation Basi statiche di bloccaggio, idrauliche, autocentranti - MIA1-G2 Clamping force blocks, hydraulic, centric clamping - MIA1-G2 Kraftspannblock, hydraulisch, zentrisch spannend - MIA1-G2 Etaux de serrage, hydraulique, autocentreurs - MIA1-G2 Dati di carico ammissibili sulle dita Max. adm. forces and moments of fingers Max. krafte und Momente am Grundbacken Donnees de charge admissible Versione a 120 bar - codice HP Version at 120 bar - code HP Version bei 120 Bar - Code HP Version a 120 bar - code HP 30 QMA. Via A. De Fra ncisco 1218...

Open the catalog to page 4
MIA1-G2 Clamping force blocks, hydraulic, centric clamping - 5

Gripping systems anO automation www.omil.it info@omil.it Basi statiche di bloccaggio, idrauliche, autocentranti - MIA1-G2 Clamping force blocks, hydraulic, centric clamping - MIA1-G2 Kraftspannblock, hydraulisch, zentrisch spannend - MIA1-G2 Etaux de serrage, hydraulique, autocentreurs - MIA1-G2 Griffa di base HR Base jaw HR Grundbacke HR Mors de base HR QMiL Via A. De Francisco 128-Tel. +39.011.821.11.81 - Fax +39.011.895.44.62 - 10036 SettimoT.se (To) - Italy

Open the catalog to page 5

All OMIL catalogs and technical brochures

  1. CFB

    6 Pages