Digital RTD Thermometer 316 SS Enclosure for Sanitary, Wash-Down, and Marine Applications Antenna connection for wireless option. U arge Multicolor Backlit L Display with 25 mm (1") Digits Readable From Over 10.7 m (35') U p to ±0.2°C (±0.3°F) or U ±0.1% Rdg Accuracy U onnects Directly to C 3‑Wire Pt100 RTD Sensors U ser Scaleable 4 to 20 mA, U 0 to 5 or 0 to 10 Vdc Analog Output Standard U owered by Internal P Battery or External DC Power Supply U ncluded Setup and I Service Software Allows for Fast Maintenance and Calibration via USB Connection U ireless Transmitter W Option Sends Readings to Remote Locations and Allows for PC-Based Chart Recording and Data Logging U ow Power Operation L and Sleep Mode for Long Battery Life U isplay Backlight D Changes from Green to Blue for Low Alarm and from Green to Red for High Alarm OMEGA’s new DTG‑RTD100 Thermometer Series features a rugged 316 SS enclosure that is designed specifically for wash-down, sanitary and marine applications. The large backlit LCD display incorporates both large 25 mm (1") digits and a Magnetic stylus (included). DTG-RTD100-1/4-600-E-W-AB with angle bracket and wireless transmitter option, shown actual size. New security feature uses magnetic stylus (included) for keypad activation. No accidental button presses. Perfect for dirty hands or if wearing gloves Availa Built-In ble with Transm Wireless itter Op tion Angle B ra Option cket Flexible for Use 25 segment bar graph that make reading at distances up to 10.7 m (35') easy. Models are available with or without integral standard or sanitary sensors. Standard features include: internal battery external DC power supply operation, analog output and user programmable N-5 alarms. The wireless transmitter option allows for remote monitoring, chart recording and data logging. A variety of user-configurable options and settings include: sample interval, units and ba

Range: -51 to 538°C (-60 to 1000°F) (depending on sensor selected) Accuracy: ±0.2°C (±0.3°F) or ±0.1% of reading Resolution: 0.1°C (0.1°F) Operating Environment: -40 to 70°C (-40 to 158°F) 5 to 100% RH non-condensing RTD Probe/Sensor Input: Pt100, 3-wire Display Type: LCD with selectable backlight Display Digits: 4 digits, 9999 counts Character Height: 25.4 mm (1.0") Computer Interface: USB (one programming cable included) Sample/Display Interval: User adjustable from 0.375 to 30 seconds, preset to 1/second Power: 3.0V lithium, 4.8 Ah capacity (“C” cell) included; 12 to 24 Vdc Battery Life (Typical):...

Digital RTD Thermometer with Integral Sensor Antenna connection for wireless option. Integral Sensor Options Attach the DTG-RTD100 to a 3-A approved PRS-3-100-A-S-0300-D1-M12-2 standard duty sensor for a ¼" diameter, 3" long probe with 1½" 16AMP mounting flange. Lengths of 4, 5 and 6" are also available. Temperature range -50 to 200°C (-58 to 392°F). Ordering Example: DTG-RTD100-PRS-3-100-AS-300-D1, comes complete with thermometer and 3" L integral sensor. Attach the DTG-RTD100 to a 3-A approved PRS-3-100-A-H-0300-D1-M12-2 sensor for a heavy duty stepped probe (3⁄16 to 3⁄8" diameter), 3" long...

Digital RTD Thermometer for use with Remote Sensor Optional Mounting B Wall rack Available et Remote Sensor Options 3A approved, ⁄4" diameter standard duty design, Pt100 sensor with M12 male connector, stainless steel construction and 11⁄2" 16AMP cap, standard lengths from 3 to 6". Temperature range -50 to 200°C (-58 to 392°F). 1 Ordering Example: DTG-RTD100-M12-F-1, thermometer with female M12 connection, PRS-3-100-A-S-0600-D1-M12, 6" standard duty sensor, and M12-PVC-4-S-M-R-F-5, cable, PVC jacket, 5 m (16.4') long. 3A approved, 3⁄8" diameter (stepped to 3⁄16"), heavy-duty design, Pt100 sensor...

Thermometer without Sensor To Order Model No. Description DTG-RTD100 Digital RTD thermometer with internal terminal block connection DTG-RTD100-M12-F Digital RTD thermometer with female M12 connection, compatible with PR-21, -2 wiring, PR-22 and P-L-M12 sensors DTG-RTD100-M12-F-1 Digital RTD thermometer with female M12 connection, PR-21, -1 wiring, PRS-M12 and PR-25AP sensors DTG-RTD100-M12-M Digital RTD thermometer with male M12 connection, for use with extension cable and compatible sensor DTG-RTD100-M12-M-1 Digital RTD thermometer with male M12 connection, for use with extension cable and...