Catalogs >
OMEGA >
ADAM-5000

ADAM-5000
7Pages

Catalog excerpts

PC-BASED SOFT-LOGIC CONTROLLERS Basic System* Starts at *Basic system consists of 1 controller, 1 module, and software. See ordering examples on page A-27 Modular I/O Design Provides Optimum Flexibility Controllers Available with 4 or 8 I/O Modules Slots for up to 128 I/O Points I/O Modules for Analog Signals, RTDs, Thermocouples, Discrete I/O, Counters and Frequency RS485 and Ethernet Communications Available Industrial DIN Rail Mount Design 3-Way Isolation Electric noise and transients can enter your system through an I/O module, the power supply connection or a communication connection. The ADAM-5000 series has been designed to effectively prevent noise from all possible sources with: • 3000 Vdc isolation from ADAM-5000 I/O modules • Isolation for input signals on communication ports • Isolation for the communication port’s power supply This 3-way isolation design prevents ground loops and reduces the risk of electric noise affecting your system. Programmability The ADAM-5510KW series is designed to monitor and control processes through multi-channel I/O modules. Each system is capable of handling up to 4 or 8 I/O modules for channel capacities up to 128 I/O points. Depending on the type and number of I/O points a system can be configured to meet your optimum application requirements. The ADAM-5510KW feature 5 standard IEC61131-3 programming languages so PLC users can develop control strategies in their familiar programming languages. The strong MULTIPROG software and stable ProConOS make the ADAM-5510KW the best choice for PC-based Soft-logic controllers in the market. ProConOS, (Programmable Controller Operating System), has over 250,000+ installations, and is a pre-emptive, multi-tasking run-time software providing deterministic operation down to one millisecond and runs applications developed with MULTIPROG, a fully-featured IEC 61131-3 development environment. Also bundled with the ADAM-5510KW is ProConOS run-time software creating a complete SoftLogic Solution. The ADAM-5000 series analog input modules can be configured to accept several ranges of voltage input, current input, thermocouple input or RTD input. Counter/frequency modules can also be configured to up/down, bi-directional and frequency modes. By storing the configuration in a nonvolatile EEPROM, the system is able to retain set parameters even in the event of a power failure. ADAM-5510EKW/TCP, $556, shown smaller than actual size. RS232/RS485 Modbus Communications The main unit of ADAM-5510KW contains a 1.5 MB flash memory and 640 KB SRAM which includes battery backup RAM up to 32 KB. In addition, 4 COM ports enrich the communication capacity of ADAM-5510EKW and ADAM-5510KW to integrate with remote I/O or other 3rd party devices based on the Modbus/RTU protocol. For advanced system integration, the ADAM-5510EKW and ADAM-5510KW are built with a Modbus/RTU Server. Optional Ethernet The ADAM-5510EKW/TCP is an Ethernetenabled SoftLogic Controller. In addition to the features of ADAM-5510KW and ADAM5510EKW, the ADAM-5510EKW/TCP has Ethernet features including Modbus/TCP Server, Modbus/TCP Client and Multiprog via Ethernet functions. Therefore, users can easily and quickly complete their programming based on Ethernet architecture. For advanced system integration, the ADAM-5510EKW/TCP supports not only Modbus/RTU Master and Slave functions via serial ports, but also the Modbus/TCP Client to retrieve data from remote I/O, and Modbus/TCP Server to send data back to the HMI/SCADA Software via Ethernet port. Furthermore, the ADAM-5510EKW/TCP allows users to remotely maintain multiple ADAM-5510EKW/TCP controllers by running Multiprog programming software via Ethernet.

Open the catalog to page 1

ADAM-5510KW, $445, shown smaller than actual size. CONTROLLER SPECIFICATIONS CONTROL SYSTEM CPU: 16-bit microprocessor I/O Capacity: 8 slots (5510EKW-A and 5510EKW/TCP); 4 slots (5510KW) LED Indicators: Power, CPU, communication MEMORY Flash Disk: 512 KB Flash Memory: 768 KB Flash ROM: 256 KB RAM: 640 KB SRAM Operating System: ROM-DOS Real-Time Clock: Yes Watchdog Timer: Yes COMMUNICATIONS (Ethernet, ADAM-5510EKW/TCP only) Medium: Cat. 5 cable with RJ-45 connectors Transmission Speed: 100 Mbps (10/100Base-T) COMMUNICATIONS (Serial, All Models) Max. Nodes: 32 (in RS485 daisy-chain network)...

Open the catalog to page 2

INPUT/OUTPUT MODULES SPECIFICATIONS ADAM-5018, 7-channel thermocouple input $220, shown smaller than actual size. ADAM-5018 7-CHANNEL THERMOCOUPLE INPUT MODULE Certifications: CE, FM Connectors: 1 x plug-in screw terminal (# 14 to 22 AWG) Power Consumption: 0.63 W (max) Thermocouple Input: Accuracy: ±0.1% or better Bandwidth: 13.1 Hz @ 50 Hz 15.72 Hz @ 60 Hz Channels: 7 differential Input Impedance: 2 MΩ lnput Range: ±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA lnput Type: mV, V, mA, thermocouple Resolution: 16-bit Sampling Rate: 10 samples/sec (total) T/C Type and Temperature...

Open the catalog to page 3

INPUT/OUTPUT MODULES SPECIFICATIONS ADAM-5050 ADAM-5024, 4-channel analog output, $236, shown smaller than actual size. ADAM-5024 4-CHANNEL ANALOG OUTPUT MODULE Certifications: CE, FM Connectors: 1 x Plug-in screw terminal (# 14 to 22 AWG) Power Consumption: 2.9 W (max) Analog Output Accuracy: ±0.1% of FSR for current output; ±0.2% of FSR for voltage output Channels: 4 Current Load Resistor: 0 to 500 (source) Output: Type mA, V Output Range: 0 to 20 mA, 4 to 20 mA, 0 to 10 V Programmable: 0.125 to 128.0 mA/sec Output Slope: 0.0625 to 64.0 V/sec Resolution: 12-bit Resolution: ±0.015% of FSR...

Open the catalog to page 4

INPUT/OUTPUT MODULES SPECIFICATIONS Contact Rating: AC: 250 V @ 5 A DC: 30 V @ 5 A Insulation Resistance: 1 GΩ@ 500 Vdc Relay On Time: 5 ms Relay Off Time: 5.6 ms ADAM-5060, $95, shown smaller than actual size. ADAM-5060 6 CHANNEL RELAY OUTPUT MODULE (ROHS) Certifications: CE; FM (ADAM-5060 only) Connectors: 1 x plug-in screw terminal (# 14 to 22 AWG) Power Consumption: 1.8 W (max) Relay Output: Breakdown Voltage: 500 Vac (50/60 Hz) Channels: 2 x form A , 4 x form C Contact Rating: AC: 125 V @ 0.6 A; 250 V @ 0.3 A DC: 30 V @ 2 A; 110 V @ 0.6 A Insulation Resistance: 1 GΩ min @ 500 Vdc Relay...

Open the catalog to page 5