OMAX Model 55100 - OMAX - #2

Text version of the page

Note: Specifications subject to change without notice. Printed in the U.S.A © August 2008 All rights reserved. S-002 OMAX 55100 JetMachining Center Machine Dimensions Footprint 155” x 94” (3937 mm x 2388 mm) Weight (tank empty) 8000 lb (3629 kg) Height 118” (2998 mm) Operating Weight 22,000 lb (10,000 kg) (with water in tank) Work Envelope X-Y Travel 100” x 55” (2540 mm x 1397 mm) Table Size 126” x 65” (3200 mm x 1650 mm) Material Supported Slats 4” x 1/8” Galvanized Steel Maximum Supported Material Load 250lbs/sq.ft. (1,200 kg/sq. meter) (Optional accessories may reduce travel. Contact OMAX for information.) Computer Control System Hardware Personal computer Control Software Integrated CAD/CAM system directly uses .DXF files Drive Description • Closed loop, digital drives • Brushless servo motors • Pre-loaded ball screws, recirculating balls • Linear bearings with hardened, precision ground ways • Cantilever Y-axis on bridge X-axis Accuracy of Motion at 70° F Ballbar Circularity (Over 12”) At Max. Traverse Velocity ±0.003” (±0.08 mm) Repeatability ±0.002” (±0.051 mm) Squareness 0.002” per ft (0.17 mm/m) Straightness 0.003” per ft (0.25 mm/m) Backlash 0.0007” max. (0.018 mm) Speed • 180 inches per minute standard (4572 mm/min) Electrical Requirements • 3-Phase, 380-480 VAC ±10%, 50-60 Hz (Note: Contact OMAX for detailed utility requirements. Pumps are built to meet UL and CE specifications.) Pump Options • 30 horsepower, 50,000 psi (3500 bar) • 40 horsepower, 55,000 psi (3850 bar) Noise Level • Below 80 dBA at 1 meter for submerged cutting Optional Accessories • Dual Pump Package (redundant 30 hp or 40 hp option) • Tilt-A-Jet Cutting Head for taper compensation • Solids Removal System (SRS) • Terrain Follower (TF) • Z-axis Drill • Precision Optical Locator (POL) • Water-only MAXJET 5 for cutting soft materials • OMAX MAXJET 5 MiniJet Nozzle Assembly • Manual Tilt Z • Stone Cutting Kit • Weir Tank • Waterjet Brick Kit • Catcher Tank Armor Plating • Stainless Steel Tank Cover Kit Abrasivejet Head Controller Support Slats Catcher Tank Y-axis X-axis OMAX Corporation 21409 72nd Ave South, Kent, WA 98032 253-872-2300 tel 253-872-6190 fax 1-800-838-0343 toll-free WWW.OMAX.COM website C o r p o r a t i o n About OMAX OMAX has the industry leading patented abrasivejet controller with a built-in expert system. Our exclusive “Compute First-Move Later” motion control system automates most programming and tool setup work, virtually eliminating the need for extensive operator training. Plus, with free OMAX Intelli-MAX® Software upgrades for life of the machine and our ongoing commitment to advance the efficiency of our technology and software, OMAX saves you time and money. For information on what other OMAX products and accessories can do for you, call us today at 800-838-0343 or visit our website at www.omax.com. • Dual Pump Package (redundant 30 hp or 40 hp)