OMAX Model 2626 | xp - OMAX - #2

Text version of the page

Note: Specifi cations subject to change without notice. OMAX Corporation 21409 72nd Ave South, Kent, WA 98032 253-872-2300 tel 253-872-6190 fax 1-800-838-0343 toll-free WWW.OMAX.COM website Printed in the U.S.A © June 2007 All rights reserved. OC-0026 OMAX 2626|xp JetMachining Center Machine Dimensions Footprint 72” x 116” (1829 mm x 2946 mm) Weight 3520 lb (1600 kg) Height 92” (2340 mm) Operating Weight 7017 lb (3190 kg) (with water in tank) Work Envelope X-Y Cutting Area 29” x 25” (737 mm x 635 mm) Table Size 46”x 31” (1168 mm x 787 mm) (Optional accessories may reduce travel.) Computer Control System Hardware Windows® XP PC-based controller Control Software Integrated CAD/CAM system directly uses .DXF fi les Drive Description • Closed loop, digital drives • Brushless servo motors • Pre-loaded ball screws, recirculating balls • Linear bearings with hardened, precision ground ways • Cantilever Y-Axis on bridge X-Axis Speed • 90 inches per minute standard (2286 mm/min) Positioning Accuracy Ball Bar Circularity (Over 12”) At Max. Traverse Velocity ±0.001” (±0.025 mm) (Contingent on Environmental Requirements.) Environmental Requirements • Room air temperature 70°F (±2°) maintained for 24 hours prior to and during operation • Catcher tank water temperature 70°F (±1°) maintained through use of OMAX Catcher Tank Cooler • Machine table must be level and maintain level when jogging machine through the entire travel • No external mechanical or thermal load is allowed on any part of the machine table Electrical Requirements • 3-Phase, 380-480 VAC ±10%, 50-60 Hz (Note: Contact OMAX for detailed utility requirements. Pumps are built to meet UL and CE specifi cations.) Pump • 3055V Pump Package Standard (Note: You may require a chiller if your water temperature is in excess of 70°F.) Noise Level • Below 80 dBA for submerged cutting Optional Accessories • Waterjet Brick for cutting thin materials • Splash Shield Kit • Weir Tank • Z-Axis Drill • Manual Tilt Z • Terrain Follower • Stainless Steel Frame Cover Kit About OMAX OMAX has the industry leading patented abrasivejet controller with a built-in expert system. The OMAX Software makes it easy to machine precision parts as fast as possible at the lowest cost. JetMachining is ideal for short-run part production, just-in-time manufacturing, tooling, and prototype part development. It requires no tool changes or complex fi xturing, so you can reduce setup times by at least 50%. For more information on what other OMAX products and accessories can do for you, call us today at 800-838-0343 or visit our website at www.omax.com. Controller Abrasivejet Head Y-Axis Stainless Support Slats Stainless Steel Tank X-Axis