| | | | |
| | | |
| | | |
| | | |
| | The IPLEX FX introduces new levels of durability to industrial industrial videoscopes with its shock-resistant case design and wear-resistant scope exterior. Adding "strength-of-construction" to a frequently used, job-essential tool produces one tough, reliable and long-lasting piece of industrial inspection equipment. | |
| | | |
| | Cast Magnesium-alloy Chassis for Impact Resistance | |
| | | |
| | The main component of the IPLEX FX base unit chassis is magnesium - renowned for its strength and light weight. A typical material used for industrial environment equipment, magnesium was chosen to provide the impact resistance and solid base that withstands the knocks and bumps that commonly occur to industrial videoscopes. In addition to | a crush-resistant chassis each corner is protected by rubber bumpers, further softening a drop and maximising product reliability while reducing potential for damage. The IPLEX FX survived the repetitive 4-foot drop test for compliance to MIL-STD 810F.* | |
| | | |
| | The chassis corners are protected by rubber bumpers to reduce the impact force created by the typical bumps and knocks of an industrial workplace. | |
| | | |
| | The crush resistant cast magnesium chassis is the core of the IPLEX FX mechanical design strength. The extra durability in construction results in extra protection against equipment damages. | |
| | | |
| | * MIL-STD (The United States Defense Standard) is used to help achieve standardisation objectives by the U.S. Department of Defense. | |
| | | |
| | | |
| | | |
| | The most critical component of any remote visual inspection tool is the insertion tube. It performs the basic requirement of accessing the inspection area and frequently navigating through narrow paths with abrasive and rough surfaces. The IPLEX FX insertion tube is the latest Olympus IPLEX design, with enhanced crush protection and 3x greater fray resistance. Strength was added to the insertion tube without compromising the flexibility and ability to navigate through Articulation wires and electronics only. With LED illumination at the scope tip, fiber optic bundles are not necessary. | the most difficult inspections. As with all of our IPLEX products, the IPLEX FX is designed with the Olympus Tough TaperFlex graduated stiffness design for maximum scope flexibility towards the scope end. The IPLEX FX scope unit is available in three insertion tube diameters: 6.0mm, 4.0mm and a 6.2mm model with internal working channel.* | |
| | To navigate through tight bends or corners, minimum bend radius and shorter rigid tip sections are essential design criteria for our scope tip, optics and tip adaptors. | |
| | | |
| | TaperFlex coil features graduated flexibility for easy scope manoeuverability and navigation. | High density outer braid for maximum wear resistance and durability. | |
| | | |
| | * I PLEX scope diameters are specified as the minimum ring gauge diameter that the scope can pass through. | |
| | | |
| | | |
| | | |
| | | | |