catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
High pressure grease, Coating, Cutting oil, White paste, Release agent
Text version of the page
| Cleaners | |||||||||||||||||||||||||||||
| Properties / Approvals | Main Components | Application tips | Packaging | ||||||||||||||||||||||||||
| colourless additives, solvent mixture | Generously wet or spray the surfaces to be cleaned from 5 l canister a short distance and rub down with cloths if necessary. 25 l canister Then allow to dry approx. 1 min. at room temperature. 200 l drum Check resistance of plastics and paintwork before using. 500 ml aerosol* | ||||||||||||||||||||||||||||
| colourless solvent mixture | Switch off voltage and discharge electrostatic charging before use. Spray until desired cleanliness is achieved. Due to the wide variety of plastics used in electrical engineering, check plastics for corresponding resistance before use. | 400 ml aerosol | |||||||||||||||||||||||||||
| reddish surface-active agents, water | Depending on degree of soiling, can be diluted with 5 l canister water in ratio between 1: 5 and 1:40. Spray on and rinse 25 l canister with water or wipe off after allowing to soak in briefly. 200 l drum Suitable for high-pressure devices and steam jet cleaners. Check compatibility with surfaces before use. | ||||||||||||||||||||||||||||
| li | |||||||||||||||||||||||||||||
| la | |||||||||||||||||||||||||||||
| NSF A1 Reg. No. 129003 LGA Quality Certificate | |||||||||||||||||||||||||||||
| colourless solvent mixture | Generously spray the surfaces to be cleaned from a short distance and rub down with cloths if necessary. Then allow to dry approx. 1 min. at room temperature. Check resistance of plastics and paintwork before using. | 600 ml aerosol | |||||||||||||||||||||||||||