| •Precautions for use ■Fully insert the connector. Also, take care that an excessively large tensile force is not applied to the connector. ■ Switch OFF the power before connecting or disconnecting the connector. ■When connecting or disconnecting the connector, pull the connector in such a way that it is parallel to the mating connector. If you gouge the connector, or repeatedly insert and pull it out to an excessive degree, the housing or pins may become damaged. ■Do not step on these products. ■These cables are intended for high-speed transmission of small signals, so any large noise may result in signal errors. ■ Keep these cables at least 60cm from the location of a possible noise source (air conditioner, electric light, etc.). •Warranty ■This document is not guaranteed to transmit the image data, prior checking with each systems are required ■ We cannot guarantee this product if you use it under the following conditions. •Concerning trouble such as the inability of a certain appliance connected to the equipment to operate stably or operate at all •Concerning loss of data, for example, generated during use •Concerning trouble such as a breakdown or trouble in an appliance due to improper use •Concerning trouble that occurred when a non-standard connector was used, for example |