| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Power Combiners | | |
| | | |
| | | Power Combiners are available in all-fiber Multimode, Polarization-Maintaining, or Single-Mode constructions. There are designed for efficient coupling into cladding pumped fibers. Custom designs and value-added Gain Module or Laser Assemblies are also available. See individual variations below: | | |
| | | |
| | | Product Description | | |
| | | Features and Benefits | | |
| | | Typical Applications | | |
| | | |
| | | |
| | | |
| | | Multimode Multimode Power combiners couple 7 or 19 multimode high-power sources into cladding pumped fiber. MM Input Fiber (7 shown) | | |
| | | Industrial Military Medical | | 1 Easy splicing 1 High coupling efficiency 1 Compatible with pump diodes with multimode input fiber of 0.15 NA or 0.22 NA 1 Provides scalability | | |
| | | |
| | | |
| | | |
| | | for connection to Broad Area Emitters | | |
| | | |
| | | Single-Mode Single-Mode Power Combiners couple 6 or 18 multimode high-power sources and 1 single-mode signal source for combined power output or for use with a cladding pumped fiber. | | |
| | | • Compatible with 915 nm and 976 nm pump diodes with multimode pigtail fiber with NA of .15 or .22 • Easy splicing • High coupling efficiency • Provides scalability | | |
| | | • This "Signal fiber design" is used for applications in the following industries: Industrial Military Medical 1 Optimized for 1 urn and 1.5 urn applications | | |
| | | |
| | | MM Input Fiber (6 shown) r-4 | | |
| | | |
| | | |
| | | 1 or 1.5 |jm SM Signal | | |
| | | О О | | |
| | | |
| | | |
| | | |
| | | for connection to Broad Area Emitters | | |
| | | |
| | | Polarization-Maintaining Polarization-Maintaining Power Combiners couple 6 or 18 multimode high-power sources and 1 polarization-maintaining (PM) source for combined power output or for use with a PM cladding pumped fiber. MM Input Fiber (6 shown) _L | | |
| | | 1 This "Signal fiber design" is used to construct high-power amplifiers requiring signal polarization outputs for use in the following industries: Industrial Military Medical Telecommunications 1 Optimized for 1 urn and 1.5 urn applications | | |
| | | > All PM design-PM signal input and output » Compatible with 915 nm and 976 nm pump diodes with multimode pigtail fiber with NA of .15 or .22 »Easy splicing »High coupling efficiency »Provides scalability | | |
| | | |
| | | 1 or 1.5 |jm PM Signal | | |
| | | |
| | | ©o< | | |
| | | |
| | | |
| | | |
| | | for connection to Broad Area Emitters | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |