| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Cell for Capillary Electrophoresis | | |
| | | |
| | | Solutions Absorbance The CUV-CCE Electrophoresis Sample Cell is an optical fixture for measuring the absorbance of solutions in chromatography or capillary electrophoresis systems. The cell's design -- light projects through | | |
| | | |
| | | | | |
| | the sides of the silica tubing -- eliminates pressurcommonly associated with tubing breakdown | c minio electrophoresis | | |
| | | |
| | | Excellent Chemical Resistance The CUV-CCE cell, fixtures and fittings are made of robust PEEK material The cell, which can be purchased separately as CUV-CCE-CROSS, has a through-hole of 0.51 mm and comes with 10-32 coned female threads and four fittings. Two fibers (included) face each other across | | |
| | | | | | | | | | Specifications | | | | Dimensions: | 28.6 mm x 28.6 mm (cross); | | | | | 50.8 mm x 50.8 mm (cross with fittings) | | | | Weight: | 9.4 g | | | | Cell material: | PEEK polymer | | | | Fixtures & fittings material: | PEEK polymer | | | | Threads: | 10-32 | | | | Through-hole: | 0.51 mm | | | | Fittings: | (4) F-300 double-winged nuts with F-142 ferrule | | | | Swept volume: | 0.721 uL | | | | Tubing sleeve diameter: | 0.41 mm inner diameter, 1.57 mm outer diameter | | | | Tubing sleeve length: | 31.8 mm | | | | Tubing size accommodated: | 350-390 urn outer diameter | | | | Pressure rating (tubing): | 6,000 psi (414 bar) | | | | | | | | | |
| | | the sample tubing. To complete the system, we recommend a spectrometer manufacturer and a DH2000-BAL Light Source (see page 122) | | |
| | | |
| | | Fibers & Tubing Sleeves Included The CUV-CCE comes with two 300-pm solarization-resistant fibers and tubing sleeves to connect tubing to the threaded ports. You can also purchase the CUV-CCE-CROSS tubing sleeves separately. Other sleeve sizes are available. CUV-CCE: $599 CUV-CCE-CROSS: $65 CUV-CCE-TUBING: $15 | | |
| | | CD 3 TJ n CD | | |
| | | |
| | | |
| | | |
| | | | | |
| | | □ □ CD CD CD □ e CD | | |
| | | |
| | | Displaces Volumes from 1 juL The PUMP-IT-1000 Positive Displacement Pump Kit is a pulsed pump that displaces from 1 pL to 250 pL of fluid with each pump or cycle. The amount of fluid displaced with each cycle is set via software. The amount pumped is precise to 0.3% with repeatability of better than 0.5%. The pump provides a ripple-free and bubble-free flow. For accurate mixing and/or dilution of fluids, the pump has upper and lower limits that can be set mechanically and via the software (included), which also allows you to select the displacement amount and the speed of the displacement. Applications The PUMP-IT-1000 Kit is useful for those wanting to automate the delivery of reagents into accurate flow setups. Typical applications include blood chemistry, blood analysis, particle sizing, in vitro diagnostics and biopharmaceutical analysis. The PUMP-IT-1000 comes with everything needed for a flow setup; you can also purchase the pump separately (PUMP-IT-PUMP). PUMP-IT-1000: $999 PUMP-IT-PUMP: $565 | | |
| | | |
| | | |
| | | Volume: 250 uLfull scale; 0.028 uLvolume per full step | | |
| | | |
| | | Throughput: Actuator: Accuracy: Pump head: Pump piston: Pump body: | | > 60% (based on 400 urn optical fiber) 5 VDC, 0.49 amp/phase, 10.2 ohm/phase, 9.6 mHz/phase_ < 0.5% repeatability; < 0.3% precision Acrylic (custom options include polycarbonate and PEEK) PEEK (custom options include stainless steel, ceramic and glass) Aluminum (custom options include stainless steel and acrylic) | | |
| | | |
| | | Dimensions (in cm): Pump: 3.50 x | | 3.50 x 16.94; Controller: 11.93 x 11.93 x 6.35
| |
| | | |
| | | |
| | | Controller: Baud rate: AC adapter: | | | |
| | | |
| | | 2400 or 9600 baud serial connection | | |
| | | |
| | | 7.5 VAC, 1 A_ 10 feet of Tygon tubing 10 female Luer fittings, 1/4 hex to 10-32 thread; 10 1/16" ID elbow fittings; 10 male luer fittings, 1/4 hex to 10-32 thread; 10 luer plugs and 10 caps; 10 1/16" ID barbed fittings with10-32 thread; and 10 1/16" ID barbed tee fittings | | |
| | | |
| | | Tubing: Nylon fittings: | | |
| | | The PUMP-IT-1000 Kit comes with the Positive Displacement Pump, a 250-pL sample bottle, 10 feet of tubing, various nylon fittings, controller box and power supply, RS-232 cable and software. | | |
| | | |
| | | |
| | | |
| | | 99 | | |
| | | Tel: 727.733.2447 • Email: Info@OceanOptics.com | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |