| Thrust loads up to 1100 lbs. (Square rail model shown above) Suitable for mounting in any position horizontal, vertical, inverted or on an incline. Low torque required to drive the load due to high efficiency ball screw drive. Linear bearings provide low stick slip for precise positioning and ease of moving load. Magnetic cover strip protects the ball guides from contaminants and effectively seals the profile from the environment. Low profile saddle. Tensioning station on cover strip helps eliminate stretching of the strip to extend life. T-slots for mounting feet or limit switches. Ball screw support allows higher speeds with longer stroke acuators. Mounting feet are modular for ease of installation. Motor mounting for all NEMA standard 23, 34 and 42 frame motors. Rodless design allows the load to be mounted directly to the carriage, eliminates the need for support bearings and reduces overall length of the unit. NEMA standard gearheads mount directly to the unit. Optional NuMate™ mounting pattern is available. |