| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | F Series Non-Rotating NFPA Interchangeable | | |
| | | |
| | | How to Order | | |
| | | |
| | | 00 A | | A A r\ | | |
| | | |
| | | |
| | | Magnet 0 = No Magnet 2 = Magnet | | |
| | | Mounting F1 = Front Flange F2 = Rear Flange P1 = Fixed Clevis P2 = Detachable Clevis P3 = Fixed Eye P4 = Detachable Eye S2 = Side Lug Mount S4 = Bottom Tapped X0 = Basic No Mount X2 = Cap Extended Tie Rods | | |
| | | |
| | | Options AA = No Options BA" = Bumpers Both Ends (3-1/4" and 4" only) BH" = Bumper Head only (3-1/4" and 4" only) BC" = Bumper Cap only KA* = Stroke Adjuster DA = Double Rod End NA = Nickel Plated Cylinder Stainless Steel rod and Tie rods RA* =Save Air Stroke Adjuster SA = Stainless Steel Piston Rod SS = Stainless Piston Rod and Tie Rod ST = Stainless Tie Rods 1A* = Rod Extension 4A* =Stop Tube * Specify length. "Bumpers add 0.062" to OAL (per bumper). | | |
| | | |
| | | Type F = | | |
| | | F Series Non-Rotating NFPA Interchangeable | | |
| | | |
| | | |
| | | K = 1-1/2" L= 2" M = 2 1/2" P =3 1/4" R= 4" Full Inch of Stroke 00 = 0" Stroke 01 =1" Stroke 02 = 2" Stroke 03 = 3" Stroke 20 = 20" Stroke | | |
| | | |
| | | Cushions Position No Cushion | | |
| | | 12 3 4 AAAA | | |
| | | |
| | | | | | | | | | | | | | Head and Cap | B | c | D | E | | | | | Head Only | F | G | H | J | | | | | Cap Only | K | L | M | N | | | | | Ports | | | | | | | | | Position | 1/8" | 1/4" | 3/8" | 1/2" | 3/4" | | | | 1 | B | C | D | E | F | | | | 2 | H | I | J | K | L | | | | 3 | N | 0 | P | Q | R | | | | 4 | T | U | V | W | X | | | | | | | | | | | | | |
| | | |
| | | Fractional Inches of Stroke | | |
| | | |
| | | | | | | | | | | | A | = 0" | I | = 1/2" | | | | B | = 1/16" | J | = 9/16" | | | | C | = 1/8" | K | = 5/8" | | | | D | = 3/16" | L | = 11/16" | | | | E | = 1/4" | M | = 3/4" | | | | F | = 5/16" | N | = 13/16" | | | | G | = 3/8" | O | = 7/8" | | | | H | = 7/16" | P | = 15/16" | | | | | | | | | | | |
| | | |
| | | Rod End Codes
| | |
| | | |
| | | = Vertical Rod Style # 1 = Vertical Rod Style # 2 = Vertical Rod Style # 3 = Special Rod ends = Horizontal Rod Style # 1 = Horizontal Rod Style # 2 = Horizontal Rod Style # 3 | | |
| | | 1 2 3 4 6 7 8 | | |
| | | |
| | | |
| | | |
| | | Port and Cushion Orientation | | |
| | | Cylinder Rod Orientation | | |
| | | |
| | | |
| | | w5# | | |
| | | |
| | | 2" | | 2" | | 2" | | |
| | | 4 | | | 4 | | | 4 | | |
| | | |
| | | 3 | | 3 | | 3 | | |
| | | |
| | | Optional Rod Orientation Horizontal | | |
| | | * Ports Normally In Position 1 ** Cushions Normally In Position 2 | | |
| | | Standard Rod Orientation Vertical | | |
| | | |
| | | |
| | | |
| | | Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com. | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |