Catalogues - fieldbus-electronics-and-i-o

Catalogue Fieldbus Electronics and I/O

www.numatics.com

Page

/ 76

Contact the
Manufacturer

Where to buy
this product ?

Request
a Quote

/ 76

See other catalogues for NUMATICS

Text version of the page

numams

Individual Base Node

DeviceLogix

DeviceLogix is a Rockwell Automation technology that allows a DeviceNet node to be programmed to execute a sequence independently from the control for the main PLC/IPC. A DeviceLogix enabled DeviceNet node can be used in conjunction with a standard DeviceNet network, providing simple distributed control functionality. Additionally, it can also be used in a standalone application, without a network connection or PLC/IPC, to sequence pneumatic valves manufacturer and control I/O. Numatics has integrated this licensed technology into its DeviceNet compatible valve manifold series, which combine the functionality of a modular pneumatic valve system with integrated I/O.

Programming of the DeviceLogix enabled node is done using the industry standard DeviceNet commissioning software tool RSNetworx for DeviceNet for Rockwell Automation. The programming software features an easily understandable graphics environment where the users can simply "drag and drop" logic function blocks (i.e. AND, NAND, OR, NOR, XOR, XNOR, RS LATCHES, COUNTERS and TIMERS) onto a page and interconnect them to develop the required sequence, or ladder logic programming can be used to develop a sequence. The programmed sequence is downloaded to the node via the standard DeviceNet communication connection, thus multiple nodes can be programmed simultaneously on the same network.

Technical Data

ELECTRICAL DATA

VOLTAGE

CURRENT

Node Power

Bus Power

Valve & Discrete I/O

Aux Power connector

24 VDC +/- 10%

11-25 VDC

24 VDC +/- 10%

Single key 4 pin 12mm micro type (male)

0.040 amps. 0.025 amps. 8 amps, maximum


	Communication Connector	Single key 5 pin 12mm micro type (male)
	LED's	Module Status, Network status, Auxiliary power status, Logic enabled and I/O status
	OPERATING DATA
	Temperature Range	-10° to +115° F (-23° to +46° C)
	Humidity	95% relative humidity, non condensing
	Moisture	Designed to meet NEMA 4 / IP65 requirements
	CONFIGURATION DATA
	Communication Module	Contains all communication electronics as well as short circuit protected driver circuitry for up to 2 valve solenoids
	Maximum Valve Solenoid Outputs	2
	Maximum Discrete I/O Points	Various Combinations of 2 outputs and 6 inputs
	NETWORK DATA
	Supported Baud Rates	125K, 250K, 500K and Autobaud
	Supported Connection Types	Polled, Cyclic, Change of State (COS) and Combination Message Capability
	Bus connector	Single key 5 pin 12mm micro type (male)
	Diagnostics	Shorts and open load conditions from valve solenoid coils & outputs are monitored
	Special Features	Supports Auto-Device Replacement (ADR)

Electronic Data Sheet (EDS) file and technical manuals are available In the download section of the Numatics, Inc. web site at: www.numatics.com/fleldbus

Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com.