| | | Mark 55 Shown • Shaded components described by Assembly Kit (AK) model number designation (see #1, pg. 27), with the exception of the industrial communication module and number of I/O stations that are described by Electronic Interface (NXG) model number designation, (see #3, pg. 28) • Each valve manifold station is listed in sequential order form left to right when facing the port side of the manifold as indicated. • Each discrete I/O station is listed in sequential order from RIGHT to LEFT starting from the communication module as indicated. NOTE: 1. Total of 32 solenoid outputs available. Either 32 single solenoid valves or 16 double solenoid valves or any combination of singles or doubles, not to exceed 32 solenoid outputs. 2. All valves must have a terminal block in the mounting (19M Option). 3. Valves will be wired based on the number of solenoids on the valve (1 output for a single solenoid valve and 2 for double(. If all stations are to be wired for double solenoid valves, option code "A05" must be used in the "AK" number. 4. All blank stations will be wired for double solenoid valves. 5. The NX number must use the "G15" option code for combination of. | | |