| | | • Shaded components described by assembly Kit (AK) model number designation (see #1, pg. 27), with the exception of the industrial communication module and number of I/O stations that are described by Electronic Interface (NXG) model number designation, (see #3, pg. 28) • Each valve manifold station is listed in sequential order form left to right when facing the port side of the manifold as indicated. • Each discrete I/O station is listed in sequential order from RIGHT to LEFT starting from the communication module as indicated. NOTE: 1. Total of 32 solenoid outputs available. Either 32 single solenoid valves or 16 double solenoid valves or any combination of singles or doubles, not to exceed 32 solenoid outputs. 2. When ordering a manifold assembly that exceeds 16 solenoids, the model number of the valve station containing the 1 7th solenoid MUST use a selection for the 7tn and 8tn digits from model selection table for the valve type. 3. For manifold assemblies that exceed 16 solenoids, the assembly MUST be configured so an even number of solenoids are utilized prior to the station using the ribbon cable feature. The 16tn & 17tn solenoid cannot be on the same valve. | | Example Order: (ISO 5599/2) | | |