| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | umaTics | | |
| | | |
| | | G2-2 Electronics | | |
| | | |
| | | How to Order 1) Assembly Kit Selection Each valve station must specify valve type and configuration. | | |
| | | |
| | | QTPi | | |
| | | |
| | | Electrical / Electronic Type & Location | | |
| | | Options STD = DRM = MUF = DWM= A06 = | | |
| | | Standard DIN Rail Mounting Muffler In End Plates DIN Rail with MUF End plate with ports on left end only, mounting plate only on right end A06 w/DIN Rail Mounting A06 w/Muffler in End Plates A06 w/DIN Rail with MUF External Pilot All Stations Wired as Doubles (AKV only) | | |
| | | |
| | | C | | Industrial communication module 2005, 2012 & 2035 Series or ISO 15407-2 = Communication Module ISO 1, 2 & 3 Series and 2002 Series = Communication Module Mark 8, 15, 55 & 2009 Series | | |
| | | |
| | | E | | |
| | | | |
| | | V | | | D10 D11 F05 14X A05 | | |
| | | |
| | | |
| | | Valve Series B = 2035 Series E = 2005 or ISO 15407-2 18 mm 9 = 2009 Series G= 2012 or ISO 15407-2 26 mm H = Mark 8 J = Mark 15 M = Mark 55 Compact P= Mark 55 Fullslze Q = ISO 5599/2 Size 1 R = ISO 5599/2 Size 2 5 = ISO 5599/2 Size 3 6 = 2002 Series | | |
| | | |
| | | |
| | | Port Type L = Push In (2005 or 2012 only) N= NPTF G = Metric End Plate Port Size 2** = 2012 and 2009 3** = 2012, 2005, Mark 8, ISO 5599/2 Size 1 4 = Mark 15 or ISO 5599/2 Size 2 & 2035 | | |
| | | |
| | | Number of Valve Stations* | | |
| | | |
| | | |
| | | | | | | | | | | | | | | A= 1 | l= 9 | Q = | 17 | Y = | 25 | 5 = Mark 55 Compact | | | | B= 2 | J= 10 | R = | 18 | Z = | 26 | 6 = ISO 5599/2 Size 3 | | | | C= 3 | K= 11 | S = | 19 | 2 = | 27 | 7 = Mark 55 Fullsize | | | | D= 4 | L = 12 | T = | 20 | 3 = | 28 | FT* = 2012 | | | | E= 5 | M= 13 | u = | 21 | 4 = | 29 | K** = 2005 or 2012 | | | | F= 6 | N= 14 | v = | 22 | 5 = | 30 | ** See chart below | | | | G= 7 | 0= 15 | w = | 23 | 6 = | 31 | | | | | H= 8 | P= 16 | x = | 24 | 7 = | 32 | ^^^^^1 2005 2012 | | | | | | | | | | | | | | |
| | | |
| | | 3 = 3/8 K = 10mm tube | | 3 = Port Type G, N, or L | | |
| | | *Maximum number of valve stations is determined by the combination of single and double Z-Boards types installed in the manifold sub-bases. All G2-2 communication modules support 32 output drivers for valve solenoid coils. | | |
| | | |
| | | Port 1 = 3/8 2 = Port Type L Only Port 1 = 1/4 H = Port Type L Only Port 1 = 8mm K = Port Type L Only Port 1 = 10mm | | Port 3/5 = 1/2 | | |
| | | | |
| | | Port 3/5 = 3/8 | | |
| | | |
| | | |
| | | Port 3/5 = 12mm | | |
| | | |
| | | Port 3/5 = 14mm | | |
| | | |
| | | Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com. | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |