| | | DeviceLogix DeviceLogix is a Rockwell Automation technology that allows a DeviceNet node to be programmed to execute a sequence independently from the control for the main PLC/IPC. A DeviceLogix enabled DeviceNet node can be used in conjunction with a standard DeviceNet network, providing simple distributed control functionality. Additionally, it can also be used in a standalone application, without a network connection or PLC/IPC, to sequence industrial pneumatic valves and control I/O. Numatics has integrated this licensed technology into its DeviceNet compatible valve manifold series, which combine the functionality of a modular pneumatic valve system with integrated I/O. Programming of the DeviceLogix enabled node is done using the industry standard DeviceNet commissioning software tool RSNetworx for DeviceNet for Rockwell Automation. The programming software features an easily understandable graphics environment where the users can simply "drag and drop" logic function blocks (i.e. AND, NAND, OR, NOR, XOR, XNOR, RS LATCHES, COUNTERS and TIMERS) onto a page and interconnect them to develop the required sequence, or ladder logic programming can be used to develop a sequence. The programmed sequence is downloaded to the node via the standard DeviceNet communication connection, thus multiple nodes can be programmed simultaneously on the same network. | | |
| | | | | | | | | | ELECTRICAL DATA | VOLTAGE CURRENT | | | | Node Power | 24 VDC +/- 10% | | | | Bus Power | 11-25 VDC 0.025 amps | | | | Valve & Discrete I/O | 24 VDC +/- 10% 8 amps, maximum | | | | | Single key 4 pin mini type (male) | | | | Communication Connector | Single key 5 pin (Mini type) male | | | | LED's | Module status, Network status, Auxiliary power status, Industrial fuse integrity and Logic enabled. | | | | OPERATING DATA | | | | Temperature Range | -10' to +115T (-23' to +46'C) | | | | Humidity | 95% relative humidity, non-condensing | | | | Moisture | Designed to meet NEMA 4 / IP65 requirements | | | | CONFIGURATION DATA | | | | Comm. Interface Module | Contains all communication and control electronics as well as short circuit protected driver circuitry for up to 32 valve solenoids | | | | Maximum Valve Solenoid Outputs | 32 | | | | Maximum Discrete I/O Points | Various combinations of up to 80 outputs & 96 inputs; logical limit of 72 function block | | | | NETWORK DATA | | | | Supported Baud Rates | 125 K Baud, 250 K Baud and 500 K Baud with auto-baud detection | | | | Connectors | Single key 5 pin mini or 12mm micro type (male) | | | | Diagnostics | Shorts and open load conditions from valve solenoid coils and outputs are monitored | | | | Special Features | Does not require a network connection for stand-alone applications | | | | | | | | | |