TLM - NOVOTECHNIK - #1

Text version of the page

Transducer up to 4500 mm touchless absolute Series TLM with Start-Stop-, SSI-, DyMoS-, Analogue- Interface Description Housing Anodized aluminium with metal end cap Mounting Compression clamps, longitudinally adjustable Position marker Floating marker, plastic Guided marker, ball coupling Measuring technique NOVOSTRICTIVE®, touchless magnetostrictive Electrical connection 8-pin round connector, shielded, M12x1 8-pin round connector, shielded, IEC130-9 8-conductor cable, shielded, 1 m long Electronics Integrated SMD with ASIC Connect cable shield to housing Special features • absolute transducer, no slide arm required • NOVOSTRICTIVE®, touchless magnetostrictive measuring process • high-dynamic serial DyMoS®-interface with data transmission interface • non-contacting guiding with floating position marker • unlimited mechanical life • no velocity limit for position marker • outstanding linearity performance up to 30 ìm • resolution up to 0.001 mm regardless of stroke length • analogue interfaces with teach-in function • low temperature coefficient <20 ppm/K • insensitive to shock and vibration • optionally cable or plug connection • protection class IP67 / IP68 Transducers employing the NOVOSTRICTIVE® touchless magnetostrictive measuring process for direct, precise and absolute measurement of linear position in control, positioning and measuring technology. The measurement is accomplished using a passive position marker which can be moved as a free-floating or guided element. Side coupling of the position marker reduces the installation envelope size, prevents the pump effect of slide arms and permits stroke lengths up to 4500 mm. The non-contact coupling version makes installation even simpler, and the wearfree operation means unlimited mechanical life expectancy and unlimited traverse speed of the position marker. The temperature coefficient of the transducer is extremely low thanks to the measuring principle, design and selected materials. The high mechanical ruggedness of the transducer combined with the underlying measuring technique mean that the system is highly resistant to shock and vibration. The active sensing element is encased in an aluminum housing rated to IP 67. This makes the transducer resistant to contamination, dust, moisture and oils. Mounting is accomplished using clamps that allow precise mechanical adjustment. A sophisticated ASIC in the transducer provides for standard absolute output signals. In addition to the familiar interfaces such as the synchronous serial interface (24 or 25 bits), the Start/Stop pulse interface and analogue voltage or current interfaces, a high-dynamic serial DyMoS® interface with data transfer monitoring is offered. The advantages of conventional interfaces and bus interfaces have been combined this Novetechnik DyMoS® interface. In addition to the position value, the DyMoS interface also allows the actual traverse velocity to be sent. The pulse interface also allows fully toleranced processing both edges of the Start/Stop signal. As an option, the transducer can also be operated with multiple position markers. Additional interfaces see separate data sheet.