| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Modular Linear Actuator Addendums 05| NOOK EGZ 30, 40, 60, 80 ^ 'A,DUS™'ES- Belt Driven | | |
| | | |
| | | Function: This linear unit consists of an aluminium square profile with lateral V-guides. The carriage that can be adjusted free of play is driven along the V-guides by a timing belt. The pulleys have maintenance-free ball bearings. Belt tension can be readjusted by a simple screw adjustment device in the carriage. This device can also be use for symmetrical adjustment of two or more linear units running parallel. | | |
| | | 14 | | |
| | | |
| | | <-o E ZD "O a CD "O < a < a o :> | | |
| | | |
| | | Fitting length: Carriage mounting: Unit mounting: Belt type: | | |
| | | As required. Max. length 6,000 mm without joints. T-slots T-slots or tapped holes in the bearing block, mounting sets. HTD with steel reinforcement, no backlash when changing direction, repeatability: ± 0,1 mm. | | |
| | | |
| | | |
| | | Forces and torques | | |
| | | |
| | | | | | | | | | | | | | | | | Size | EGZ 30 | EGZ 40 | EGZ 60 | EGZ 80 | | | | Forces/Torques | static | dynamic | static | dyna m ic | static | dynamic | static | dyna m ic | | | | Fx (N) | 200 | 180 | 390 | 350 | 894 | 800 | 1900 | 1800 | | | | F (N) | 90 | 60 | 350 | 315 | 500 | 450 | 1000 | 900 | | | | Fz (N) | 90 | 60 | 500 | 450 | 750 | 675 | 1 125 | 1000 | | | | Mx (Nm) | 10 | 5 | 20 | 18 | 33 | 30 | 82 | 75 | | | | M (Nm) y | 13 | 6 | 44 | 40 | 77 | 70 | 220 | 200 | | | | Mz (Nm) | 14 | 7 | 33 | 30 | 55 | 50 | 165 | 150 | | | | | | | | | | | | | | | | |
| | | |
| | | |
| | | No-load torque | | |
| | | existing values values of table | | |
| | | Mx | | My | | Mz | | |
| | | |
| | | <1 | | |
| | | | |
| | | + | | + | | | + | | |
| | | |
| | | |
| | | Fydyn Fzdyn Mxdyn Mydyn Mzdyn | | |
| | | |
| | | |
| | | Nm | | 0,2 | | 0,3 | | 0,6 | | 0,9 | | |
| | | |
| | | |
| | | Speed | | |
| | | |
| | | (m/sec) max | | |
| | | 2 | | 2 | | 2 | | 2 | | |
| | | |
| | | |
| | | Tensile force | | |
| | | |
| | | permanent (N) | | 200 | | 390 | | 900 | | 1900 | | |
| | | |
| | | |
| | | 0,2 sec (N) | | 280 | | 480 | | 1000 | | 2090 | | |
| | | |
| | | |
| | | Geometrical moments of inertia of aluminium profile | | |
| | | |
| | | | | | | | | | | | | lx mm4 | 4,09x104 | 1,4x105 | 5,62x105 | 19,23x105 | | | | l mm4 y | 4,00x104 | 1,47x105 | 6,05x105 | 20,09x105 | | | | E-Modu us N/mm2 | 70000 | 70000 | 70000 | 70000 | | | | | | | | | | | | |
| | | |
| | | Formula: EGZ Driving torque: F*p*s Ma= 2000 * 7C | | |
| | | F*L3 | | |
| | | f = | | |
| | | |
| | | E*I*192 | | |
| | | |
| | | | | | | | | | | F | = force | (N) | | | | P | = pulley action perimeter | (mm) | | | | S. | = safety factor 1,2 ... 2 | | | | | Mleer | = no-load torque | (Nm) | | | | n | = rpm pulley | (min-1) | | | | Ma | = driving torque | (Nm) | | | | Pa | = motor power | (KW) | | | | | | | | | | |
| | | |
| | | +Mee | | |
| | | f = deflection (mm) F = load (N) L = free length (mm) E = elastic modulus 70000 (N/mm2) I = second moment of area (mm4) | | |
| | | |
| | | |
| | | M *n 95a50 | | |
| | | |
| | | |
| | | |
| | | 1 of 2 www.precisionactuator.com toll-free (877) 915-7100 080106 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |