Catalogs >
NITTO KOHKI USA >
PURGE ADAPTER Ck059

PURGE ADAPTER Ck059
2Pages

Catalog excerpts

Residual Pressure Purge Adapter for Hydraulic Lines PURGE ADAPTER Ideal for eliminating residual pressure in piping Slim and neat piping with an in-line design Couplings can be connected smoothly High pressure up to 35 MPa Couplings and hoses are not included. Please purchase them separately. Just Push Residual Pressure Purge Speed Comparison [Test Conditions] -Fluid: Hydraulic oil -Fluid viscosity: 32×10 -6 m 2/s -Pressure: 35 MPa -Cubic capacity of piping: Approx. 5 L In-line Purge Adapter Eliminates residual pressure instantly Purge residual pressure Tube fittings are not included. Please purchase them separately. Products Comply with RoHS Directive

Open the catalog to page 1

In-line design Operate the button by leverage Can be operated with a screwdriver if the button is stiff. >- Insert an ordinary flat head screwdriver into the groove in the Valve Holder and press the button by leverage. PAD-3FM Purge residual pressure The tee joint is not included. Please prepare separately. The groove in the Valve Holder *1: The normal allowable fluid pressure under continuous use. Continuously exceeding the working pressure may cause leakage or damage. *2: The working temperature range depends upon the operating conditions. Not suitable for vacuum application. Models and...

Open the catalog to page 2

PURGE ADAPTER Ck059 2Pages

Catalog excerpts

All NITTO KOHKI USA catalogs and technical brochures

PURGE ADAPTER Ck059
2Pages